Re: [PATCH 1/2] usb: xhci-mtk: fix fs isoc's transfer error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Il 12/05/22 08:49, Chunfeng Yun ha scritto:
Due to the scheduler allocates the optimal bandwidth for FS ISOC endpoints,
this may be not enough actually and causes data transfer error, so come up
with an estimate that is no less than the worst case bandwidth used for
any one mframe, but may be an over-estimate.

Fixes: 451d3912586a ("usb: xhci-mtk: update fs bus bandwidth by bw_budget_table")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>

Hello Chunfeng,
I agree this is "a fix"... but is it the best fix?

Shooting the bandwidth very high will have power consumption consequences, are
those measurable?
And if they are, what is the expected power consumption increase in percentage
(and/or microamperes)? Also, out of the expected increase, have you got any
measurement for that?

Assuming that the measurement is done for one SoC, it's possible to make some
assumption about a different part.

Regards,
Angelo

---
  drivers/usb/host/xhci-mtk-sch.c | 16 +++++++---------
  1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c
index f3139ce7b0a9..953d2cd1d4cc 100644
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux