[PATCH AUTOSEL 5.10 7/9] net: sfp: Add tx-fault workaround for Huawei MA5671A SFP ONT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Matthew Hagan <mnhagan88@xxxxxxxxx>

[ Upstream commit 2069624dac19d62c558bb6468fe03678553ab01d ]

As noted elsewhere, various GPON SFP modules exhibit non-standard
TX-fault behaviour. In the tested case, the Huawei MA5671A, when used
in combination with a Marvell mv88e6085 switch, was found to
persistently assert TX-fault, resulting in the module being disabled.

This patch adds a quirk to ignore the SFP_F_TX_FAULT state, allowing the
module to function.

Change from v1: removal of erroneous return statment (Andrew Lunn)

Signed-off-by: Matthew Hagan <mnhagan88@xxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Link: https://lore.kernel.org/r/20220502223315.1973376-1-mnhagan88@xxxxxxxxx
Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/phy/sfp.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index efffa65f8214..96068e0d841a 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -249,6 +249,7 @@ struct sfp {
 	struct sfp_eeprom_id id;
 	unsigned int module_power_mW;
 	unsigned int module_t_start_up;
+	bool tx_fault_ignore;
 
 #if IS_ENABLED(CONFIG_HWMON)
 	struct sfp_diag diag;
@@ -1893,6 +1894,12 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
 	else
 		sfp->module_t_start_up = T_START_UP;
 
+	if (!memcmp(id.base.vendor_name, "HUAWEI          ", 16) &&
+	    !memcmp(id.base.vendor_pn, "MA5671A         ", 16))
+		sfp->tx_fault_ignore = true;
+	else
+		sfp->tx_fault_ignore = false;
+
 	return 0;
 }
 
@@ -2320,7 +2327,10 @@ static void sfp_check_state(struct sfp *sfp)
 	mutex_lock(&sfp->st_mutex);
 	state = sfp_get_state(sfp);
 	changed = state ^ sfp->state;
-	changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT;
+	if (sfp->tx_fault_ignore)
+		changed &= SFP_F_PRESENT | SFP_F_LOS;
+	else
+		changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT;
 
 	for (i = 0; i < GPIO_MAX; i++)
 		if (changed & BIT(i))
-- 
2.35.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux