From: Tan Tee Min <tee.min.tan@xxxxxxxxxxxxxxx>
commit 47f753c1108e287edb3e27fad8a7511a9d55578e upstream.
Based on DesignWare Ethernet QoS datasheet, we are seeing the limitation
of Split Header (SPH) feature is not supported for Ipv4 fragmented packet.
This SPH limitation will cause ping failure when the packets size exceed
the MTU size. For example, the issue happens once the basic ping packet
size is larger than the configured MTU size and the data is lost inside
the fragmented packet, replaced by zeros/corrupted values, and leads to
ping fail.
So, disable the Split Header for Intel platforms.
v2: Add fixes tag in commit message.
Fixes: 67afd6d1cfdf("net: stmmac: Add Split Header support and enable it in XGMAC cores")
Cc: <stable@xxxxxxxxxxxxxxx> # 5.10.x
Suggested-by: Ong, Boon Leong <boon.leong.ong@xxxxxxxxx>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@xxxxxxxxx>
Signed-off-by: Wong Vee Khee <vee.khee.wong@xxxxxxxxxxxxxxx>
Signed-off-by: Tan Tee Min <tee.min.tan@xxxxxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 1 +
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +-
include/linux/stmmac.h | 1 +
3 files changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -454,6 +454,7 @@ static int intel_mgbe_common_data(struct
plat->has_gmac4 = 1;
plat->force_sf_dma_mode = 0;
plat->tso_en = 1;
+ plat->sph_disable = 1;
/* Multiplying factor to the clk_eee_i clock time
* period to make it closer to 100 ns. This value
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7081,7 +7081,7 @@ int stmmac_dvr_probe(struct device *devi
dev_info(priv->device, "TSO feature enabled\n");
}
- if (priv->dma_cap.sphen) {
+ if (priv->dma_cap.sphen && !priv->plat->sph_disable) {
ndev->hw_features |= NETIF_F_GRO;
priv->sph_cap = true;
priv->sph = priv->sph_cap;
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -269,5 +269,6 @@ struct plat_stmmacenet_data {
int msi_rx_base_vec;
int msi_tx_base_vec;
bool use_phy_wol;
+ bool sph_disable;
};
#endif
