From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
[ Upstream commit e4e6448638a01905faeda9bf96aa9df7c8ef463c ]
It's noted that dcvs interrupts are not self-clearing, thus an interrupt
handler runs constantly, which leads to a severe regression in runtime.
To fix the problem an explicit write to clear interrupt register is
required, note that on OSM platforms the register may not be present.
Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/cpufreq/qcom-cpufreq-hw.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index 1e99b71e7844..ca0f1be1c3b2 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -24,6 +24,8 @@
#define CLK_HW_DIV 2
#define LUT_TURBO_IND 1
+#define GT_IRQ_STATUS BIT(2)
+
#define HZ_PER_KHZ 1000
struct qcom_cpufreq_soc_data {
@@ -31,6 +33,7 @@ struct qcom_cpufreq_soc_data {
u32 reg_domain_state;
u32 reg_freq_lut;
u32 reg_volt_lut;
+ u32 reg_intr_clr;
u32 reg_current_vote;
u32 reg_perf_state;
u8 lut_row_size;
@@ -347,6 +350,10 @@ static irqreturn_t qcom_lmh_dcvs_handle_irq(int irq, void *data)
disable_irq_nosync(c_data->throttle_irq);
schedule_delayed_work(&c_data->throttle_work, 0);
+ if (c_data->soc_data->reg_intr_clr)
+ writel_relaxed(GT_IRQ_STATUS,
+ c_data->base + c_data->soc_data->reg_intr_clr);
+
return IRQ_HANDLED;
}
@@ -364,6 +371,7 @@ static const struct qcom_cpufreq_soc_data epss_soc_data = {
.reg_domain_state = 0x20,
.reg_freq_lut = 0x100,
.reg_volt_lut = 0x200,
+ .reg_intr_clr = 0x308,
.reg_perf_state = 0x320,
.lut_row_size = 4,
};
--
2.35.1
