From: Tony Lindgren <tony@xxxxxxxxxxx>
[ Upstream commit 8d2453d9a307c2eafd21242dd73f35f05fb7ce74 ]
We currently are getting the following warning after a system suspend:
Powerdomain (vpe_pwrdm) didn't enter target state 0
Looks like this is because the STANDBYMODE bit for SMART_IDLE should
not be used. The TRM "Table 12-348. VPE_SYSCONFIG" says that the value
for SMART_IDLE is "0x2: Same behavior as bit-field value of 0x1". But
if the SMART_IDLE value is used, PM_VPE_PWRSTST LASTPOWERSTATEENTERED
bits always show value of 3.
Let's fix the issue by dropping SMART_IDLE for vpe. And let's also add
the missing the powerdomain for vpe.
Fixes: 1a2095160594 ("ARM: dts: dra7: Add ti-sysc node for VPE")
Cc: Benoit Parrot <bparrot@xxxxxx>
Reported-by: Kevin Hilman <khilman@xxxxxxxxxxxx>
Reviewed-by: Kevin Hilman <khilman@xxxxxxxxxxxx>
Tested-by: Kevin Hilman <khilman@xxxxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm/boot/dts/dra7-l4.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 0a11bacffc1f..5733e3a4ea8e 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -4188,11 +4188,11 @@ target-module@1d0010 { /* 0x489d0000, ap 27 30.0 */
reg = <0x1d0010 0x4>;
reg-names = "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>;
+ <SYSC_IDLE_NO>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
+ power-domains = <&prm_vpe>;
clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
--
2.35.1
