From: Adam Ford <aford173@xxxxxxxxx>
[ Upstream commit 942da3af32b2288e674736eb159d1fc676261691 ]
The bootloader for the AM3517 has previously done much of the pin
muxing, but as the bootloader is moving more and more to a model
based on the device tree, it may no longer automatically mux the
pins, so it is necessary to add the pinmuxing to the Linux device
trees so the respective peripherals can remain functional.
Fixes: 6ed1d7997561 ("ARM: dts: am3517-evm: Add support for UI board and Audio")
Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
Message-Id: <20220226214820.747847-1-aford173@xxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm/boot/dts/am3517-evm.dts | 45 +++++++++++++++++++++++++++----
arch/arm/boot/dts/am3517-som.dtsi | 9 +++++++
2 files changed, 49 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index a1fd3e63e86e..3db30ce134b9 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -160,6 +160,8 @@ pwm11: dmtimer-pwm@11 {
/* HS USB Host PHY on PORT 1 */
hsusb1_phy: hsusb1_phy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb1_rst_pins>;
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
#phy-cells = <0>;
@@ -167,7 +169,9 @@ hsusb1_phy: hsusb1_phy {
};
&davinci_emac {
- status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <ðernet_pins>;
+ status = "okay";
};
&davinci_mdio {
@@ -192,6 +196,8 @@ dpi_out: endpoint {
};
&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
/* User DIP swithes [1:8] / User LEDS [1:2] */
tca6416: gpio@21 {
@@ -204,6 +210,8 @@ tca6416: gpio@21 {
};
&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
clock-frequency = <400000>;
};
@@ -222,6 +230,8 @@ &mmc3 {
};
&usbhshost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb1_pins>;
port1-mode = "ehci-phy";
};
@@ -230,8 +240,35 @@ &usbhsehci {
};
&omap3_pmx_core {
- pinctrl-names = "default";
- pinctrl-0 = <&hsusb1_rst_pins>;
+
+ ethernet_pins: pinmux_ethernet_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
+ OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
+ OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
+ OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
+ OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
+ OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
+ OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
+ OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
+ OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
+ OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
+ >;
+ };
+
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
+ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
leds_pins: pinmux_leds_pins {
pinctrl-single,pins = <
@@ -299,8 +336,6 @@ OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */
};
&omap3_pmx_core2 {
- pinctrl-names = "default";
- pinctrl-0 = <&hsusb1_pins>;
hsusb1_pins: pinmux_hsusb1_pins {
pinctrl-single,pins = <
diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi
index 8b669e2eafec..f7b680f6c48a 100644
--- a/arch/arm/boot/dts/am3517-som.dtsi
+++ b/arch/arm/boot/dts/am3517-som.dtsi
@@ -69,6 +69,8 @@ nand@0,0 {
};
&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
s35390a: s35390a@30 {
@@ -179,6 +181,13 @@ bluetooth {
&omap3_pmx_core {
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */
--
2.35.1
