On 4/22/22 08:47, Damien Le Moal wrote:
> On 4/21/22 10:39, Zheyu Ma wrote:
>> Before detecting the cable type on the dma bar, the driver should check
>> whether the 'bmdma_addr' is zero, which means the adapter does not
>> support DMA, otherwise we will get the following error:
>>
>> [ 5.146634] Bad IO access at port 0x1 (return inb(port))
>> [ 5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60
>> [ 5.150856] RIP: 0010:ioread8+0x4a/0x60
>> [ 5.160238] Call Trace:
>> [ 5.160470] <TASK>
>> [ 5.160674] marvell_cable_detect+0x6e/0xc0 [pata_marvell]
>> [ 5.161728] ata_eh_recover+0x3520/0x6cc0
>> [ 5.168075] ata_do_eh+0x49/0x3c0
>>
>> Signed-off-by: Zheyu Ma <zheyuma97@xxxxxxxxx>
>> ---Changes in v2:
>> - Delete the useless 'else'
>
> Note for future contributions: The change log should be placed *after*
> the "---" that comes before the "diff" line below. Otherwise, the change
> log pollutes the commit message.
>
> I fixed that and applied to for-5.18-fixes. Thanks.
I completely overlooked that this needs a CC stable...
Greg,
Could you please pickup this commit for stable ?
In Linus tree/rc4, it is:
aafa9f958342 ("ata: pata_marvell: Check the 'bmdma_addr' beforing reading")
Thanks !
>
>> ---
>> drivers/ata/pata_marvell.c | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
>> index 0c5a51970fbf..014ccb0f45dc 100644
>> --- a/drivers/ata/pata_marvell.c
>> +++ b/drivers/ata/pata_marvell.c
>> @@ -77,6 +77,8 @@ static int marvell_cable_detect(struct ata_port *ap)
>> switch(ap->port_no)
>> {
>> case 0:
>> + if (!ap->ioaddr.bmdma_addr)
>> + return ATA_CBL_PATA_UNK;
>> if (ioread8(ap->ioaddr.bmdma_addr + 1) & 1)
>> return ATA_CBL_PATA40;
>> return ATA_CBL_PATA80;
>
>
--
Damien Le Moal
Western Digital Research
