Re: [PATCH] binfmt_flat: Remove shared library support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Eric,

On 21/4/22 00:58, Eric W. Biederman wrote:
In a recent discussion[1] it was reported that the binfmt_flat library
support was only ever used on m68k and even on m68k has not been used
in a very long time.

The structure of binfmt_flat is different from all of the other binfmt
implementations becasue of this shared library support and it made
life and code review more effort when I refactored the code in fs/exec.c.

Since in practice the code is dead remove the binfmt_flat shared libarary
support and make maintenance of the code easier.

[1] https://lkml.kernel.org/r/81788b56-5b15-7308-38c7-c7f2502c4e15@xxxxxxxxxxxxxx
Signed-off-by: "Eric W. Biederman" <ebiederm@xxxxxxxxxxxx>
---

Can the binfmt_flat folks please verify that the shared library support
really isn't used?

I can definitely confirm I don't use it on m68k. And I don't know of
anyone that has used it in many years.


Was binfmt_flat being enabled on arm and sh the mistake it looks like?

  arch/arm/configs/lpc18xx_defconfig |   1 -
  arch/arm/configs/mps2_defconfig    |   1 -
  arch/arm/configs/stm32_defconfig   |   1 -
  arch/arm/configs/vf610m4_defconfig |   1 -

binfmt_flat works on ARM. I use it all the time.
According to those defconfigs those are all non-MMU systems, so
having binfmt_flat enabled makes some sense there.


  arch/sh/configs/rsk7201_defconfig  |   1 -
  arch/sh/configs/rsk7203_defconfig  |   1 -
  arch/sh/configs/se7206_defconfig   |   1 -

Those are all SH2 systems if I am reading the defconfigs correctly.
SH2 is non-MMU according to the Kconfig setup. So it makes sense that
binfmt_flat is enabled on those too.

Don't forget that binfmt_flat works on many MMU enabled systems too.
I regularly test/check it on MMU enabled m68k systems for example.

Regards
Greg


  fs/Kconfig.binfmt                  |   6 -
  fs/binfmt_flat.c                   | 190 ++++++-----------------------
  9 files changed, 40 insertions(+), 163 deletions(-)

diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig
index be882ea0eee4..688c9849eec8 100644
--- a/arch/arm/configs/lpc18xx_defconfig
+++ b/arch/arm/configs/lpc18xx_defconfig
@@ -30,7 +30,6 @@ CONFIG_ARM_APPENDED_DTB=y
  # CONFIG_BLK_DEV_BSG is not set
  CONFIG_BINFMT_FLAT=y
  CONFIG_BINFMT_ZFLAT=y
-CONFIG_BINFMT_SHARED_FLAT=y
  # CONFIG_COREDUMP is not set
  CONFIG_NET=y
  CONFIG_PACKET=y
diff --git a/arch/arm/configs/mps2_defconfig b/arch/arm/configs/mps2_defconfig
index 89f4a6ff30bd..c1e98e33a348 100644
--- a/arch/arm/configs/mps2_defconfig
+++ b/arch/arm/configs/mps2_defconfig
@@ -23,7 +23,6 @@ CONFIG_PREEMPT_VOLUNTARY=y
  CONFIG_ZBOOT_ROM_TEXT=0x0
  CONFIG_ZBOOT_ROM_BSS=0x0
  CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_SHARED_FLAT=y
  # CONFIG_COREDUMP is not set
  # CONFIG_SUSPEND is not set
  CONFIG_NET=y
diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
index 551db328009d..71d6bfcf4551 100644
--- a/arch/arm/configs/stm32_defconfig
+++ b/arch/arm/configs/stm32_defconfig
@@ -28,7 +28,6 @@ CONFIG_ZBOOT_ROM_BSS=0x0
  CONFIG_XIP_KERNEL=y
  CONFIG_XIP_PHYS_ADDR=0x08008000
  CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_SHARED_FLAT=y
  # CONFIG_COREDUMP is not set
  CONFIG_DEVTMPFS=y
  CONFIG_DEVTMPFS_MOUNT=y
diff --git a/arch/arm/configs/vf610m4_defconfig b/arch/arm/configs/vf610m4_defconfig
index a89f035c3b01..70fdbfd83484 100644
--- a/arch/arm/configs/vf610m4_defconfig
+++ b/arch/arm/configs/vf610m4_defconfig
@@ -18,7 +18,6 @@ CONFIG_XIP_KERNEL=y
  CONFIG_XIP_PHYS_ADDR=0x0f000080
  CONFIG_BINFMT_FLAT=y
  CONFIG_BINFMT_ZFLAT=y
-CONFIG_BINFMT_SHARED_FLAT=y
  # CONFIG_SUSPEND is not set
  # CONFIG_UEVENT_HELPER is not set
  # CONFIG_STANDALONE is not set
diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig
index e41526120be1..619c18699459 100644
--- a/arch/sh/configs/rsk7201_defconfig
+++ b/arch/sh/configs/rsk7201_defconfig
@@ -25,7 +25,6 @@ CONFIG_CMDLINE_OVERWRITE=y
  CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
  CONFIG_BINFMT_FLAT=y
  CONFIG_BINFMT_ZFLAT=y
-CONFIG_BINFMT_SHARED_FLAT=y
  CONFIG_PM=y
  CONFIG_CPU_IDLE=y
  # CONFIG_STANDALONE is not set
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index 6af08fa1ddf8..5a54e2b883f0 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -30,7 +30,6 @@ CONFIG_CMDLINE_OVERWRITE=y
  CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
  CONFIG_BINFMT_FLAT=y
  CONFIG_BINFMT_ZFLAT=y
-CONFIG_BINFMT_SHARED_FLAT=y
  CONFIG_PM=y
  CONFIG_CPU_IDLE=y
  CONFIG_NET=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 601d062250d1..122216123e63 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -40,7 +40,6 @@ CONFIG_CMDLINE_OVERWRITE=y
  CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
  CONFIG_BINFMT_FLAT=y
  CONFIG_BINFMT_ZFLAT=y
-CONFIG_BINFMT_SHARED_FLAT=y
  CONFIG_BINFMT_MISC=y
  CONFIG_NET=y
  CONFIG_PACKET=y
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 21c6332fa785..32dff7ba3dda 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -142,12 +142,6 @@ config BINFMT_ZFLAT
  	help
  	  Support FLAT format compressed binaries
-config BINFMT_SHARED_FLAT
-	bool "Enable shared FLAT support"
-	depends on BINFMT_FLAT
-	help
-	  Support FLAT shared libraries
-
  config HAVE_AOUT
         def_bool n
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 0ad2c7bbaddd..82e4412a9665 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -68,11 +68,7 @@
  #define RELOC_FAILED 0xff00ff01		/* Relocation incorrect somewhere */
  #define UNLOADED_LIB 0x7ff000ff		/* Placeholder for unused library */
-#ifdef CONFIG_BINFMT_SHARED_FLAT
-#define	MAX_SHARED_LIBS			(4)
-#else
-#define	MAX_SHARED_LIBS			(1)
-#endif
+#define MAX_SHARED_LIBS			(1)
#ifdef CONFIG_BINFMT_FLAT_NO_DATA_START_OFFSET
  #define DATA_START_OFFSET_WORDS		(0)
@@ -92,10 +88,6 @@ struct lib_info {
  	} lib_list[MAX_SHARED_LIBS];
  };
-#ifdef CONFIG_BINFMT_SHARED_FLAT
-static int load_flat_shared_library(int id, struct lib_info *p);
-#endif
-
  static int load_flat_binary(struct linux_binprm *);
static struct linux_binfmt flat_format = {
@@ -307,51 +299,18 @@ static int decompress_exec(struct linux_binprm *bprm, loff_t fpos, char *dst,
  /****************************************************************************/
static unsigned long
-calc_reloc(unsigned long r, struct lib_info *p, int curid, int internalp)
+calc_reloc(unsigned long r, struct lib_info *p)
  {
  	unsigned long addr;
-	int id;
  	unsigned long start_brk;
  	unsigned long start_data;
  	unsigned long text_len;
  	unsigned long start_code;
-#ifdef CONFIG_BINFMT_SHARED_FLAT
-	if (r == 0)
-		id = curid;	/* Relocs of 0 are always self referring */
-	else {
-		id = (r >> 24) & 0xff;	/* Find ID for this reloc */
-		r &= 0x00ffffff;	/* Trim ID off here */
-	}
-	if (id >= MAX_SHARED_LIBS) {
-		pr_err("reference 0x%lx to shared library %d", r, id);
-		goto failed;
-	}
-	if (curid != id) {
-		if (internalp) {
-			pr_err("reloc address 0x%lx not in same module "
-			       "(%d != %d)", r, curid, id);
-			goto failed;
-		} else if (!p->lib_list[id].loaded &&
-			   load_flat_shared_library(id, p) < 0) {
-			pr_err("failed to load library %d", id);
-			goto failed;
-		}
-		/* Check versioning information (i.e. time stamps) */
-		if (p->lib_list[id].build_date && p->lib_list[curid].build_date &&
-				p->lib_list[curid].build_date < p->lib_list[id].build_date) {
-			pr_err("library %d is younger than %d", id, curid);
-			goto failed;
-		}
-	}
-#else
-	id = 0;
-#endif
-
-	start_brk = p->lib_list[id].start_brk;
-	start_data = p->lib_list[id].start_data;
-	start_code = p->lib_list[id].start_code;
-	text_len = p->lib_list[id].text_len;
+	start_brk = p->lib_list[0].start_brk;
+	start_data = p->lib_list[0].start_data;
+	start_code = p->lib_list[0].start_code;
+	text_len = p->lib_list[0].text_len;
if (r > start_brk - start_data + text_len) {
  		pr_err("reloc outside program 0x%lx (0 - 0x%lx/0x%lx)",
@@ -419,7 +378,7 @@ static void old_reloc(unsigned long rl)
  /****************************************************************************/
static int load_flat_file(struct linux_binprm *bprm,
-		struct lib_info *libinfo, int id, unsigned long *extra_stack)
+		struct lib_info *libinfo, unsigned long *extra_stack)
  {
  	struct flat_hdr *hdr;
  	unsigned long textpos, datapos, realdatastart;
@@ -471,14 +430,6 @@ static int load_flat_file(struct linux_binprm *bprm,
  		goto err;
  	}
- /* Don't allow old format executables to use shared libraries */
-	if (rev == OLD_FLAT_VERSION && id != 0) {
-		pr_err("shared libraries are not available before rev 0x%lx\n",
-		       FLAT_VERSION);
-		ret = -ENOEXEC;
-		goto err;
-	}
-
  	/*
  	 * fix up the flags for the older format,  there were all kinds
  	 * of endian hacks,  this only works for the simple cases
@@ -529,15 +480,13 @@ static int load_flat_file(struct linux_binprm *bprm,
  	}
/* Flush all traces of the currently running executable */
-	if (id == 0) {
-		ret = begin_new_exec(bprm);
-		if (ret)
-			goto err;
+	ret = begin_new_exec(bprm);
+	if (ret)
+		goto err;
- /* OK, This is the point of no return */
-		set_personality(PER_LINUX_32BIT);
-		setup_new_exec(bprm);
-	}
+	/* OK, This is the point of no return */
+	set_personality(PER_LINUX_32BIT);
+	setup_new_exec(bprm);
/*
  	 * calculate the extra space we need to map in
@@ -717,42 +666,40 @@ static int load_flat_file(struct linux_binprm *bprm,
  	text_len -= sizeof(struct flat_hdr); /* the real code len */
/* The main program needs a little extra setup in the task structure */
-	if (id == 0) {
-		current->mm->start_code = start_code;
-		current->mm->end_code = end_code;
-		current->mm->start_data = datapos;
-		current->mm->end_data = datapos + data_len;
-		/*
-		 * set up the brk stuff, uses any slack left in data/bss/stack
-		 * allocation.  We put the brk after the bss (between the bss
-		 * and stack) like other platforms.
-		 * Userspace code relies on the stack pointer starting out at
-		 * an address right at the end of a page.
-		 */
-		current->mm->start_brk = datapos + data_len + bss_len;
-		current->mm->brk = (current->mm->start_brk + 3) & ~3;
+	current->mm->start_code = start_code;
+	current->mm->end_code = end_code;
+	current->mm->start_data = datapos;
+	current->mm->end_data = datapos + data_len;
+	/*
+	 * set up the brk stuff, uses any slack left in data/bss/stack
+	 * allocation.  We put the brk after the bss (between the bss
+	 * and stack) like other platforms.
+	 * Userspace code relies on the stack pointer starting out at
+	 * an address right at the end of a page.
+	 */
+	current->mm->start_brk = datapos + data_len + bss_len;
+	current->mm->brk = (current->mm->start_brk + 3) & ~3;
  #ifndef CONFIG_MMU
-		current->mm->context.end_brk = memp + memp_size - stack_len;
+	current->mm->context.end_brk = memp + memp_size - stack_len;
  #endif
-	}
if (flags & FLAT_FLAG_KTRACE) {
  		pr_info("Mapping is %lx, Entry point is %x, data_start is %x\n",
  			textpos, 0x00ffffff&ntohl(hdr->entry), ntohl(hdr->data_start));
  		pr_info("%s %s: TEXT=%lx-%lx DATA=%lx-%lx BSS=%lx-%lx\n",
-			id ? "Lib" : "Load", bprm->filename,
+			"Load", bprm->filename,
  			start_code, end_code, datapos, datapos + data_len,
  			datapos + data_len, (datapos + data_len + bss_len + 3) & ~3);
  	}
/* Store the current module values into the global library structure */
-	libinfo->lib_list[id].start_code = start_code;
-	libinfo->lib_list[id].start_data = datapos;
-	libinfo->lib_list[id].start_brk = datapos + data_len + bss_len;
-	libinfo->lib_list[id].text_len = text_len;
-	libinfo->lib_list[id].loaded = 1;
-	libinfo->lib_list[id].entry = (0x00ffffff & ntohl(hdr->entry)) + textpos;
-	libinfo->lib_list[id].build_date = ntohl(hdr->build_date);
+	libinfo->lib_list[0].start_code = start_code;
+	libinfo->lib_list[0].start_data = datapos;
+	libinfo->lib_list[0].start_brk = datapos + data_len + bss_len;
+	libinfo->lib_list[0].text_len = text_len;
+	libinfo->lib_list[0].loaded = 1;
+	libinfo->lib_list[0].entry = (0x00ffffff & ntohl(hdr->entry)) + textpos;
+	libinfo->lib_list[0].build_date = ntohl(hdr->build_date);
/*
  	 * We just load the allocations into some temporary memory to
@@ -774,7 +721,7 @@ static int load_flat_file(struct linux_binprm *bprm,
  			if (rp_val == 0xffffffff)
  				break;
  			if (rp_val) {
-				addr = calc_reloc(rp_val, libinfo, id, 0);
+				addr = calc_reloc(rp_val, libinfo);
  				if (addr == RELOC_FAILED) {
  					ret = -ENOEXEC;
  					goto err;
@@ -810,7 +757,7 @@ static int load_flat_file(struct linux_binprm *bprm,
  				return -EFAULT;
  			relval = ntohl(tmp);
  			addr = flat_get_relocate_addr(relval);
-			rp = (u32 __user *)calc_reloc(addr, libinfo, id, 1);
+			rp = (u32 __user *)calc_reloc(addr, libinfo);
  			if (rp == (u32 __user *)RELOC_FAILED) {
  				ret = -ENOEXEC;
  				goto err;
@@ -833,7 +780,7 @@ static int load_flat_file(struct linux_binprm *bprm,
  					 */
  					addr = ntohl((__force __be32)addr);
  				}
-				addr = calc_reloc(addr, libinfo, id, 0);
+				addr = calc_reloc(addr, libinfo);
  				if (addr == RELOC_FAILED) {
  					ret = -ENOEXEC;
  					goto err;
@@ -861,7 +808,7 @@ static int load_flat_file(struct linux_binprm *bprm,
  	/* zero the BSS,  BRK and stack areas */
  	if (clear_user((void __user *)(datapos + data_len), bss_len +
  		       (memp + memp_size - stack_len -		/* end brk */
-		       libinfo->lib_list[id].start_brk) +	/* start brk */
+		       libinfo->lib_list[0].start_brk) +	/* start brk */
  		       stack_len))
  		return -EFAULT;
@@ -871,49 +818,6 @@ static int load_flat_file(struct linux_binprm *bprm,
  }
-/****************************************************************************/
-#ifdef CONFIG_BINFMT_SHARED_FLAT
-
-/*
- * Load a shared library into memory.  The library gets its own data
- * segment (including bss) but not argv/argc/environ.
- */
-
-static int load_flat_shared_library(int id, struct lib_info *libs)
-{
-	/*
-	 * This is a fake bprm struct; only the members "buf", "file" and
-	 * "filename" are actually used.
-	 */
-	struct linux_binprm bprm;
-	int res;
-	char buf[16];
-	loff_t pos = 0;
-
-	memset(&bprm, 0, sizeof(bprm));
-
-	/* Create the file name */
-	sprintf(buf, "/lib/lib%d.so", id);
-
-	/* Open the file up */
-	bprm.filename = buf;
-	bprm.file = open_exec(bprm.filename);
-	res = PTR_ERR(bprm.file);
-	if (IS_ERR(bprm.file))
-		return res;
-
-	res = kernel_read(bprm.file, bprm.buf, BINPRM_BUF_SIZE, &pos);
-
-	if (res >= 0)
-		res = load_flat_file(&bprm, libs, id, NULL);
-
-	allow_write_access(bprm.file);
-	fput(bprm.file);
-
-	return res;
-}
-
-#endif /* CONFIG_BINFMT_SHARED_FLAT */
  /****************************************************************************/
/*
@@ -946,7 +850,7 @@ static int load_flat_binary(struct linux_binprm *bprm)
  	stack_len += (bprm->envc + 1) * sizeof(char *);   /* the envp array */
  	stack_len = ALIGN(stack_len, FLAT_STACK_ALIGN);
- res = load_flat_file(bprm, &libinfo, 0, &stack_len);
+	res = load_flat_file(bprm, &libinfo, &stack_len);
  	if (res < 0)
  		return res;
@@ -991,20 +895,6 @@ static int load_flat_binary(struct linux_binprm *bprm)
  	 */
  	start_addr = libinfo.lib_list[0].entry;
-#ifdef CONFIG_BINFMT_SHARED_FLAT
-	for (i = MAX_SHARED_LIBS-1; i > 0; i--) {
-		if (libinfo.lib_list[i].loaded) {
-			/* Push previos first to call address */
-			unsigned long __user *sp;
-			current->mm->start_stack -= sizeof(unsigned long);
-			sp = (unsigned long __user *)current->mm->start_stack;
-			if (put_user(start_addr, sp))
-				return -EFAULT;
-			start_addr = libinfo.lib_list[i].entry;
-		}
-	}
-#endif
-
  #ifdef FLAT_PLAT_INIT
  	FLAT_PLAT_INIT(regs);
  #endif



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux