From: Roman Li <Roman.Li@xxxxxxx> [ Upstream commit 58e16c752e9540b28a873c44c3bee83e022007c1 ] [Why] In init_hw() we call init_pipes() before enabling power gating. init_pipes() tries to power gate dsc but it may fail because required force-ons are not released yet. As a result with dsc config the following errors observed on resume: "REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_dpp_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_hubp_pg_control" [How] Move enable_power_gating_plane() before init_pipes() in init_hw() Reviewed-by: Anthony Koo <Anthony.Koo@xxxxxxx> Reviewed-by: Eric Yang <Eric.Yang2@xxxxxxx> Acked-by: Alex Hung <alex.hung@xxxxxxx> Signed-off-by: Roman Li <Roman.Li@xxxxxxx> Tested-by: Daniel Wheeler <daniel.wheeler@xxxxxxx> Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 5 +++-- drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c | 5 +++-- drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c | 5 +++-- 3 files changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c index b3a0499f8554..711b18d96eae 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c @@ -1439,6 +1439,9 @@ void dcn10_init_hw(struct dc *dc) } } + if (hws->funcs.enable_power_gating_plane) + hws->funcs.enable_power_gating_plane(dc->hwseq, true); + /* If taking control over from VBIOS, we may want to optimize our first * mode set, so we need to skip powering down pipes until we know which * pipes we want to use. @@ -1491,8 +1494,6 @@ void dcn10_init_hw(struct dc *dc) REG_UPDATE(DCFCLK_CNTL, DCFCLK_GATE_DIS, 0); } - if (hws->funcs.enable_power_gating_plane) - hws->funcs.enable_power_gating_plane(dc->hwseq, true); if (dc->clk_mgr->funcs->notify_wm_ranges) dc->clk_mgr->funcs->notify_wm_ranges(dc->clk_mgr); diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c index 0950784bafa4..f83457375811 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c @@ -570,6 +570,9 @@ void dcn30_init_hw(struct dc *dc) } } + if (hws->funcs.enable_power_gating_plane) + hws->funcs.enable_power_gating_plane(dc->hwseq, true); + /* If taking control over from VBIOS, we may want to optimize our first * mode set, so we need to skip powering down pipes until we know which * pipes we want to use. @@ -647,8 +650,6 @@ void dcn30_init_hw(struct dc *dc) REG_UPDATE(DCFCLK_CNTL, DCFCLK_GATE_DIS, 0); } - if (hws->funcs.enable_power_gating_plane) - hws->funcs.enable_power_gating_plane(dc->hwseq, true); if (!dcb->funcs->is_accelerated_mode(dcb) && dc->res_pool->hubbub->funcs->init_watermarks) dc->res_pool->hubbub->funcs->init_watermarks(dc->res_pool->hubbub); diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c index 3afa1159a5f7..b72d080b302a 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c @@ -204,6 +204,9 @@ void dcn31_init_hw(struct dc *dc) } } + if (hws->funcs.enable_power_gating_plane) + hws->funcs.enable_power_gating_plane(dc->hwseq, true); + /* If taking control over from VBIOS, we may want to optimize our first * mode set, so we need to skip powering down pipes until we know which * pipes we want to use. @@ -287,8 +290,6 @@ void dcn31_init_hw(struct dc *dc) REG_UPDATE(DCFCLK_CNTL, DCFCLK_GATE_DIS, 0); } - if (hws->funcs.enable_power_gating_plane) - hws->funcs.enable_power_gating_plane(dc->hwseq, true); if (!dcb->funcs->is_accelerated_mode(dcb) && dc->res_pool->hubbub->funcs->init_watermarks) dc->res_pool->hubbub->funcs->init_watermarks(dc->res_pool->hubbub); -- 2.35.1
