[PATCH 4.19 155/338] net: bcmgenet: Use stronger register read/writes to assure ordering

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Jeremy Linton <jeremy.linton@xxxxxxx>

[ Upstream commit 8d3ea3d402db94b61075617e71b67459a714a502 ]

GCC12 appears to be much smarter about its dependency tracking and is
aware that the relaxed variants are just normal loads and stores and
this is causing problems like:

[  210.074549] ------------[ cut here ]------------
[  210.079223] NETDEV WATCHDOG: enabcm6e4ei0 (bcmgenet): transmit queue 1 timed out
[  210.086717] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:529 dev_watchdog+0x234/0x240
[  210.095044] Modules linked in: genet(E) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat]
[  210.146561] ACPI CPPC: PCC check channel failed for ss: 0. ret=-110
[  210.146927] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G            E     5.17.0-rc7G12+ #58
[  210.153226] CPPC Cpufreq:cppc_scale_freq_workfn: failed to read perf counters
[  210.161349] Hardware name: Raspberry Pi Foundation Raspberry Pi 4 Model B/Raspberry Pi 4 Model B, BIOS EDK2-DEV 02/08/2022
[  210.161353] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  210.161358] pc : dev_watchdog+0x234/0x240
[  210.161364] lr : dev_watchdog+0x234/0x240
[  210.161368] sp : ffff8000080a3a40
[  210.161370] x29: ffff8000080a3a40 x28: ffffcd425af87000 x27: ffff8000080a3b20
[  210.205150] x26: ffffcd425aa00000 x25: 0000000000000001 x24: ffffcd425af8ec08
[  210.212321] x23: 0000000000000100 x22: ffffcd425af87000 x21: ffff55b142688000
[  210.219491] x20: 0000000000000001 x19: ffff55b1426884c8 x18: ffffffffffffffff
[  210.226661] x17: 64656d6974203120 x16: 0000000000000001 x15: 6d736e617274203a
[  210.233831] x14: 2974656e65676d63 x13: ffffcd4259c300d8 x12: ffffcd425b07d5f0
[  210.241001] x11: 00000000ffffffff x10: ffffcd425b07d5f0 x9 : ffffcd4258bdad9c
[  210.248171] x8 : 00000000ffffdfff x7 : 000000000000003f x6 : 0000000000000000
[  210.255341] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000001000
[  210.262511] x2 : 0000000000001000 x1 : 0000000000000005 x0 : 0000000000000044
[  210.269682] Call trace:
[  210.272133]  dev_watchdog+0x234/0x240
[  210.275811]  call_timer_fn+0x3c/0x15c
[  210.279489]  __run_timers.part.0+0x288/0x310
[  210.283777]  run_timer_softirq+0x48/0x80
[  210.287716]  __do_softirq+0x128/0x360
[  210.291392]  __irq_exit_rcu+0x138/0x140
[  210.295243]  irq_exit_rcu+0x1c/0x30
[  210.298745]  el1_interrupt+0x38/0x54
[  210.302334]  el1h_64_irq_handler+0x18/0x24
[  210.306445]  el1h_64_irq+0x7c/0x80
[  210.309857]  arch_cpu_idle+0x18/0x2c
[  210.313445]  default_idle_call+0x4c/0x140
[  210.317470]  cpuidle_idle_call+0x14c/0x1a0
[  210.321584]  do_idle+0xb0/0x100
[  210.324737]  cpu_startup_entry+0x30/0x8c
[  210.328675]  secondary_start_kernel+0xe4/0x110
[  210.333138]  __secondary_switched+0x94/0x98

The assumption when these were relaxed seems to be that device memory
would be mapped non reordering, and that other constructs
(spinlocks/etc) would provide the barriers to assure that packet data
and in memory rings/queues were ordered with respect to device
register reads/writes. This itself seems a bit sketchy, but the real
problem with GCC12 is that it is moving the actual reads/writes around
at will as though they were independent operations when in truth they
are not, but the compiler can't know that. When looking at the
assembly dumps for many of these routines its possible to see very
clean, but not strictly in program order operations occurring as the
compiler would be free to do if these weren't actually register
reads/write operations.

Its possible to suppress the timeout with a liberal bit of dma_mb()'s
sprinkled around but the device still seems unable to reliably
send/receive data. A better plan is to use the safer readl/writel
everywhere.

Since this partially reverts an older commit, which notes the use of
the relaxed variants for performance reasons. I would suggest that
any performance problems with this commit are targeted at relaxing only
the performance critical code paths after assuring proper barriers.

Fixes: 69d2ea9c79898 ("net: bcmgenet: Use correct I/O accessors")
Reported-by: Peter Robinson <pbrobinson@xxxxxxxxx>
Signed-off-by: Jeremy Linton <jeremy.linton@xxxxxxx>
Acked-by: Peter Robinson <pbrobinson@xxxxxxxxx>
Tested-by: Peter Robinson <pbrobinson@xxxxxxxxx>
Acked-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Link: https://lore.kernel.org/r/20220310045358.224350-1-jeremy.linton@xxxxxxx
Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index d4be107ea4cd..c78b687a1443 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -83,7 +83,7 @@ static inline void bcmgenet_writel(u32 value, void __iomem *offset)
 	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
 		__raw_writel(value, offset);
 	else
-		writel_relaxed(value, offset);
+		writel(value, offset);
 }
 
 static inline u32 bcmgenet_readl(void __iomem *offset)
@@ -91,7 +91,7 @@ static inline u32 bcmgenet_readl(void __iomem *offset)
 	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
 		return __raw_readl(offset);
 	else
-		return readl_relaxed(offset);
+		return readl(offset);
 }
 
 static inline void dmadesc_set_length_status(struct bcmgenet_priv *priv,
-- 
2.34.1






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux