3.10-stable review patch. If anyone has any objections, please let me know. ------------------ From: Guenter Roeck <linux@xxxxxxxxxxxx> commit 145e74a4e5022225adb84f4e5d4fff7938475c35 upstream. Upper limit for write operations to temperature limit registers was clamped to a fractional value. However, limit registers do not support fractional values. As a result, upper limits of 127.5 degrees C or higher resulted in a rounded limit of 128 degrees C. Since limit registers are signed, this was stored as -128 degrees C. Clamp limits to (-55, +127) degrees C to solve the problem. Value on writes to auto_temp[12]_min and auto_temp[12]_max were not clamped at all, but masked. As a result, out-of-range writes resulted in a more or less arbitrary limit. Clamp those attributes to (0, 127) degrees C for more predictable results. Cc: Axel Lin <axel.lin@xxxxxxxxxx> Reviewed-by: Jean Delvare <jdelvare@xxxxxxx> Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/hwmon/adm1031.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -365,6 +365,7 @@ set_auto_temp_min(struct device *dev, st if (ret) return ret; + val = clamp_val(val, 0, 127000); mutex_lock(&data->update_lock); data->auto_temp[nr] = AUTO_TEMP_MIN_TO_REG(val, data->auto_temp[nr]); adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr), @@ -394,6 +395,7 @@ set_auto_temp_max(struct device *dev, st if (ret) return ret; + val = clamp_val(val, 0, 127000); mutex_lock(&data->update_lock); data->temp_max[nr] = AUTO_TEMP_MAX_TO_REG(val, data->auto_temp[nr], data->pwm[nr]); @@ -696,7 +698,7 @@ static ssize_t set_temp_min(struct devic if (ret) return ret; - val = clamp_val(val, -55000, nr == 0 ? 127750 : 127875); + val = clamp_val(val, -55000, 127000); mutex_lock(&data->update_lock); data->temp_min[nr] = TEMP_TO_REG(val); adm1031_write_value(client, ADM1031_REG_TEMP_MIN(nr), @@ -717,7 +719,7 @@ static ssize_t set_temp_max(struct devic if (ret) return ret; - val = clamp_val(val, -55000, nr == 0 ? 127750 : 127875); + val = clamp_val(val, -55000, 127000); mutex_lock(&data->update_lock); data->temp_max[nr] = TEMP_TO_REG(val); adm1031_write_value(client, ADM1031_REG_TEMP_MAX(nr), @@ -738,7 +740,7 @@ static ssize_t set_temp_crit(struct devi if (ret) return ret; - val = clamp_val(val, -55000, nr == 0 ? 127750 : 127875); + val = clamp_val(val, -55000, 127000); mutex_lock(&data->update_lock); data->temp_crit[nr] = TEMP_TO_REG(val); adm1031_write_value(client, ADM1031_REG_TEMP_CRIT(nr), -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html