From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> [ Upstream commit 9f72d4757cbe4d1ed669192f6d23817c9e437c4b ] The Qualcomm PCI bridge device (Device ID 0x0110) found in chipsets such as SM8450 does not set the Command Completed bit unless writes to the Slot Command register change "Control" bits. This results in timeouts like below: pcieport 0001:00:00.0: pciehp: Timeout on hotplug command 0x03c0 (issued 2020 msec ago) Add the device to the Command Completed quirk to mark commands "completed" immediately unless they change the "Control" bits. Link: https://lore.kernel.org/r/20220210145003.135907-1-manivannan.sadhasivam@xxxxxxxxxx Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/pci/hotplug/pciehp_hpc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 0e765e0644c2..60098a701e83 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -1086,6 +1086,8 @@ static void quirk_cmd_compl(struct pci_dev *pdev) } DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl); +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_QCOM, 0x0110, + PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl); DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_QCOM, 0x0400, PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl); DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_QCOM, 0x0401, -- 2.35.1
