From: Amjad Ouled-Ameur <aouledameur@xxxxxxxxxxxx> [ Upstream commit 2f87727130ce17ffefecd0895eeebf22d5a36f6f ] Use reset_control_rearm() call if an error occurs in case phy_meson_gxl_usb2_init() fails after reset() has been called ; or in case phy_meson_gxl_usb2_exit() is called i.e the resource is no longer used and the reset line may be triggered again by other devices. reset_control_rearm() keeps use of triggered_count sane in the reset framework. Therefore, use of reset_control_reset() on shared reset line should be balanced with reset_control_rearm(). Signed-off-by: Amjad Ouled-Ameur <aouledameur@xxxxxxxxxxxx> Reported-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> Reviewed-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> Acked-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> Link: https://lore.kernel.org/r/20220111095255.176141-2-aouledameur@xxxxxxxxxxxx Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/phy/amlogic/phy-meson-gxl-usb2.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c index 2b3c0d730f20..db17c3448bfe 100644 --- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c +++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c @@ -114,8 +114,10 @@ static int phy_meson_gxl_usb2_init(struct phy *phy) return ret; ret = clk_prepare_enable(priv->clk); - if (ret) + if (ret) { + reset_control_rearm(priv->reset); return ret; + } return 0; } @@ -125,6 +127,7 @@ static int phy_meson_gxl_usb2_exit(struct phy *phy) struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy); clk_disable_unprepare(priv->clk); + reset_control_rearm(priv->reset); return 0; } -- 2.35.1
