From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
[ Upstream commit 1528038385c0a706aac9ac165eeb24044fef6825 ]
When the dw-hdmi bridge is in first place of the bridge chain, this
means there is no way to select an input format of the dw-hdmi HW
component.
Since introduction of display-connector, negotiation was broken since
the dw-hdmi negotiation code only worked when the dw-hdmi bridge was
in last position of the bridge chain or behind another bridge also
supporting input & output format negotiation.
Commit 7cd70656d128 ("drm/bridge: display-connector: implement bus fmts callbacks")
was introduced to make negotiation work again by making display-connector
act as a pass-through concerning input & output format negotiation.
But in the case where the dw-hdmi is single in the bridge chain, for
example on Renesas SoCs, with the display-connector bridge the dw-hdmi
is no more single, breaking output format.
Reported-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
Bisected-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
Tested-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
Fixes: 6c3c719936da ("drm/bridge: synopsys: dw-hdmi: add bus format negociation")
Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
[narmstrong: add proper fixes commit]
Reviewed-by: Robert Foss <robert.foss@xxxxxxxxxx>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204143337.89221-1-narmstrong@xxxxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index 54d8fdad395f..97cdc61b57f6 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2551,8 +2551,9 @@ static u32 *dw_hdmi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge,
if (!output_fmts)
return NULL;
- /* If dw-hdmi is the only bridge, avoid negociating with ourselves */
- if (list_is_singular(&bridge->encoder->bridge_chain)) {
+ /* If dw-hdmi is the first or only bridge, avoid negociating with ourselves */
+ if (list_is_singular(&bridge->encoder->bridge_chain) ||
+ list_is_first(&bridge->chain_node, &bridge->encoder->bridge_chain)) {
*num_output_fmts = 1;
output_fmts[0] = MEDIA_BUS_FMT_FIXED;
--
2.34.1
