[PATCH 5.16 0694/1017] staging: mt7621-dts: fix pinctrl properties for ethernet

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>

[ Upstream commit 0a93c0d75809582893e82039143591b9265b520e ]

Add pinctrl properties with rgmii1 & mdio pins under ethernet node which
was wrongfully put under an external phy node.
GMAC1 will start working with this fix.

Link: https://lore.kernel.org/netdev/02ecce91-7aad-4392-c9d7-f45ca1b31e0b@xxxxxxxxxx/T/

Move GB-PC2 specific phy_external node to its own device tree.

Reviewed-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20220125153903.1469-5-arinc.unal@xxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/staging/mt7621-dts/gbpc2.dts   | 16 +++++++++++-----
 drivers/staging/mt7621-dts/mt7621.dtsi | 13 +++----------
 2 files changed, 14 insertions(+), 15 deletions(-)

diff --git a/drivers/staging/mt7621-dts/gbpc2.dts b/drivers/staging/mt7621-dts/gbpc2.dts
index 6fe603c7711d..03d6bb6735ac 100644
--- a/drivers/staging/mt7621-dts/gbpc2.dts
+++ b/drivers/staging/mt7621-dts/gbpc2.dts
@@ -13,10 +13,16 @@
 	function = "gpio";
 };
 
-&gmac1 {
-	status = "ok";
-};
+&ethernet {
+	gmac1: mac@1 {
+		status = "ok";
+		phy-handle = <&phy_external>;
+	};
 
-&phy_external {
-	status = "ok";
+	mdio-bus {
+		phy_external: ethernet-phy@5 {
+			reg = <5>;
+			phy-mode = "rgmii-rxid";
+		};
+	};
 };
diff --git a/drivers/staging/mt7621-dts/mt7621.dtsi b/drivers/staging/mt7621-dts/mt7621.dtsi
index 25687f4fa671..7b75e4a92b2a 100644
--- a/drivers/staging/mt7621-dts/mt7621.dtsi
+++ b/drivers/staging/mt7621-dts/mt7621.dtsi
@@ -363,6 +363,9 @@
 
 		mediatek,ethsys = <&sysc>;
 
+		pinctrl-names = "default";
+		pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
 		gmac0: mac@0 {
 			compatible = "mediatek,eth-mac";
 			reg = <0>;
@@ -380,22 +383,12 @@
 			reg = <1>;
 			status = "off";
 			phy-mode = "rgmii-rxid";
-			phy-handle = <&phy_external>;
 		};
 
 		mdio-bus {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			phy_external: ethernet-phy@5 {
-				status = "off";
-				reg = <5>;
-				phy-mode = "rgmii-rxid";
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&rgmii2_pins>;
-			};
-
 			switch0: switch0@0 {
 				compatible = "mediatek,mt7621";
 				#address-cells = <1>;
-- 
2.34.1






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux