[PATCH 5.17 0775/1126] pinctrl: microchip-sgpio: lock RMW access

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Michael Walle <michael@xxxxxxxx>

[ Upstream commit 7996c5f5ec7a20b3f6b8fae93fcf3cb8f1c01743 ]

Protect any RMW access to the registers by a spinlock.

Fixes: 7e5ea974e61c ("pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO")
Signed-off-by: Michael Walle <michael@xxxxxxxx>
Link: https://lore.kernel.org/r/20220226204507.2511633-2-michael@xxxxxxxx
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/pinctrl/pinctrl-microchip-sgpio.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c
index 639f1130e989..666f1e3889e0 100644
--- a/drivers/pinctrl/pinctrl-microchip-sgpio.c
+++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c
@@ -19,6 +19,7 @@
 #include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
+#include <linux/spinlock.h>
 
 #include "core.h"
 #include "pinconf.h"
@@ -116,6 +117,7 @@ struct sgpio_priv {
 	u32 clock;
 	struct regmap *regs;
 	const struct sgpio_properties *properties;
+	spinlock_t lock;
 };
 
 struct sgpio_port_addr {
@@ -229,6 +231,7 @@ static void sgpio_output_set(struct sgpio_priv *priv,
 			     int value)
 {
 	unsigned int bit = SGPIO_SRC_BITS * addr->bit;
+	unsigned long flags;
 	u32 clr, set;
 
 	switch (priv->properties->arch) {
@@ -247,7 +250,10 @@ static void sgpio_output_set(struct sgpio_priv *priv,
 	default:
 		return;
 	}
+
+	spin_lock_irqsave(&priv->lock, flags);
 	sgpio_clrsetbits(priv, REG_PORT_CONFIG, addr->port, clr, set);
+	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
 static int sgpio_output_get(struct sgpio_priv *priv,
@@ -575,10 +581,13 @@ static void microchip_sgpio_irq_settype(struct irq_data *data,
 	struct sgpio_bank *bank = gpiochip_get_data(chip);
 	unsigned int gpio = irqd_to_hwirq(data);
 	struct sgpio_port_addr addr;
+	unsigned long flags;
 	u32 ena;
 
 	sgpio_pin_to_addr(bank->priv, gpio, &addr);
 
+	spin_lock_irqsave(&bank->priv->lock, flags);
+
 	/* Disable interrupt while changing type */
 	ena = sgpio_readl(bank->priv, REG_INT_ENABLE, addr.bit);
 	sgpio_writel(bank->priv, ena & ~BIT(addr.port), REG_INT_ENABLE, addr.bit);
@@ -595,6 +604,8 @@ static void microchip_sgpio_irq_settype(struct irq_data *data,
 
 	/* Possibly re-enable interrupts */
 	sgpio_writel(bank->priv, ena, REG_INT_ENABLE, addr.bit);
+
+	spin_unlock_irqrestore(&bank->priv->lock, flags);
 }
 
 static void microchip_sgpio_irq_setreg(struct irq_data *data,
@@ -605,13 +616,16 @@ static void microchip_sgpio_irq_setreg(struct irq_data *data,
 	struct sgpio_bank *bank = gpiochip_get_data(chip);
 	unsigned int gpio = irqd_to_hwirq(data);
 	struct sgpio_port_addr addr;
+	unsigned long flags;
 
 	sgpio_pin_to_addr(bank->priv, gpio, &addr);
 
+	spin_lock_irqsave(&bank->priv->lock, flags);
 	if (clear)
 		sgpio_clrsetbits(bank->priv, reg, addr.bit, BIT(addr.port), 0);
 	else
 		sgpio_clrsetbits(bank->priv, reg, addr.bit, 0, BIT(addr.port));
+	spin_unlock_irqrestore(&bank->priv->lock, flags);
 }
 
 static void microchip_sgpio_irq_mask(struct irq_data *data)
@@ -833,6 +847,7 @@ static int microchip_sgpio_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	priv->dev = dev;
+	spin_lock_init(&priv->lock);
 
 	reset = devm_reset_control_get_optional_shared(&pdev->dev, "switch");
 	if (IS_ERR(reset))
-- 
2.34.1






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux