[PATCH 5.17 0984/1126] scsi: qla2xxx: Fix disk failure to rediscover

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Quinn Tran <qutran@xxxxxxxxxxx>

commit 6a45c8e137d4e2c72eecf1ac7cf64f2fdfcead99 upstream.

User experienced some of the LUN failed to get rediscovered after long
cable pull test. The issue is triggered by a race condition between driver
setting session online state vs starting the LUN scan process at the same
time. Current code set the online state after notifying the session is
available. In this case, trigger to start the LUN scan process happened
before driver could set the session in online state.  LUN scan ends up with
failure due to the session online check was failing.

Set the online state before reporting of the availability of the session.

Link: https://lore.kernel.org/r/20220310092604.22950-3-njavali@xxxxxxxxxxx
Fixes: aecf043443d3 ("scsi: qla2xxx: Fix Remote port registration")
Cc: stable@xxxxxxxxxxxxxxx
Reviewed-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
Signed-off-by: Quinn Tran <qutran@xxxxxxxxxxx>
Signed-off-by: Nilesh Javali <njavali@xxxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/scsi/qla2xxx/qla_init.c |    5 +++--
 drivers/scsi/qla2xxx/qla_nvme.c |    5 +++++
 2 files changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -5758,6 +5758,8 @@ qla2x00_reg_remote_port(scsi_qla_host_t
 	if (atomic_read(&fcport->state) == FCS_ONLINE)
 		return;
 
+	qla2x00_set_fcport_state(fcport, FCS_ONLINE);
+
 	rport_ids.node_name = wwn_to_u64(fcport->node_name);
 	rport_ids.port_name = wwn_to_u64(fcport->port_name);
 	rport_ids.port_id = fcport->d_id.b.domain << 16 |
@@ -5858,6 +5860,7 @@ qla2x00_update_fcport(scsi_qla_host_t *v
 		qla2x00_reg_remote_port(vha, fcport);
 		break;
 	case MODE_TARGET:
+		qla2x00_set_fcport_state(fcport, FCS_ONLINE);
 		if (!vha->vha_tgt.qla_tgt->tgt_stop &&
 			!vha->vha_tgt.qla_tgt->tgt_stopped)
 			qlt_fc_port_added(vha, fcport);
@@ -5875,8 +5878,6 @@ qla2x00_update_fcport(scsi_qla_host_t *v
 	if (NVME_TARGET(vha->hw, fcport))
 		qla_nvme_register_remote(vha, fcport);
 
-	qla2x00_set_fcport_state(fcport, FCS_ONLINE);
-
 	if (IS_IIDMA_CAPABLE(vha->hw) && vha->hw->flags.gpsc_supported) {
 		if (fcport->id_changed) {
 			fcport->id_changed = 0;
--- a/drivers/scsi/qla2xxx/qla_nvme.c
+++ b/drivers/scsi/qla2xxx/qla_nvme.c
@@ -37,6 +37,11 @@ int qla_nvme_register_remote(struct scsi
 		(fcport->nvme_flag & NVME_FLAG_REGISTERED))
 		return 0;
 
+	if (atomic_read(&fcport->state) == FCS_ONLINE)
+		return 0;
+
+	qla2x00_set_fcport_state(fcport, FCS_ONLINE);
+
 	fcport->nvme_flag &= ~NVME_FLAG_RESETTING;
 
 	memset(&req, 0, sizeof(struct nvme_fc_port_info));





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux