From: Tedd Ho-Jeong An <tedd.an@xxxxxxxxx>
[ Upstream commit 55235304c2560d4a94ccfff2a47ea927b4114064 ]
This patch adds the flag to identify the Intel legacy ROM products that
don't support WBS like WP and StP.
Fixes: 3df4dfbec0f29 ("Bluetooth: btintel: Move hci quirks to setup routine")
Signed-off-by: Tedd Ho-Jeong An <tedd.an@xxxxxxxxx>
Signed-off-by: Marcel Holtmann <marcel@xxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/bluetooth/btintel.c | 11 ++++++++---
drivers/bluetooth/btintel.h | 1 +
drivers/bluetooth/btusb.c | 6 ++++++
3 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 851a0c9b8fae..a224e5337ef8 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -2426,10 +2426,15 @@ static int btintel_setup_combined(struct hci_dev *hdev)
/* Apply the device specific HCI quirks
*
- * WBS for SdP - SdP and Stp have a same hw_varaint but
- * different fw_variant
+ * WBS for SdP - For the Legacy ROM products, only SdP
+ * supports the WBS. But the version information is not
+ * enough to use here because the StP2 and SdP have same
+ * hw_variant and fw_variant. So, this flag is set by
+ * the transport driver (btusb) based on the HW info
+ * (idProduct)
*/
- if (ver.hw_variant == 0x08 && ver.fw_variant == 0x22)
+ if (!btintel_test_flag(hdev,
+ INTEL_ROM_LEGACY_NO_WBS_SUPPORT))
set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
&hdev->quirks);
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index c9b24e9299e2..e0060e58573c 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -152,6 +152,7 @@ enum {
INTEL_BROKEN_INITIAL_NCMD,
INTEL_BROKEN_SHUTDOWN_LED,
INTEL_ROM_LEGACY,
+ INTEL_ROM_LEGACY_NO_WBS_SUPPORT,
__INTEL_NUM_FLAGS,
};
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index c1f1237ddc76..8bb67c56eb7d 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -61,6 +61,7 @@ static struct usb_driver btusb_driver;
#define BTUSB_QCA_WCN6855 0x1000000
#define BTUSB_INTEL_BROKEN_SHUTDOWN_LED 0x2000000
#define BTUSB_INTEL_BROKEN_INITIAL_NCMD 0x4000000
+#define BTUSB_INTEL_NO_WBS_SUPPORT 0x8000000
static const struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
@@ -384,9 +385,11 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x8087, 0x0033), .driver_info = BTUSB_INTEL_COMBINED },
{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
+ BTUSB_INTEL_NO_WBS_SUPPORT |
BTUSB_INTEL_BROKEN_INITIAL_NCMD |
BTUSB_INTEL_BROKEN_SHUTDOWN_LED },
{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL_COMBINED |
+ BTUSB_INTEL_NO_WBS_SUPPORT |
BTUSB_INTEL_BROKEN_SHUTDOWN_LED },
{ USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_COMBINED },
{ USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL_COMBINED |
@@ -3902,6 +3905,9 @@ static int btusb_probe(struct usb_interface *intf,
hdev->send = btusb_send_frame_intel;
hdev->cmd_timeout = btusb_intel_cmd_timeout;
+ if (id->driver_info & BTUSB_INTEL_NO_WBS_SUPPORT)
+ btintel_set_flag(hdev, INTEL_ROM_LEGACY_NO_WBS_SUPPORT);
+
if (id->driver_info & BTUSB_INTEL_BROKEN_INITIAL_NCMD)
btintel_set_flag(hdev, INTEL_BROKEN_INITIAL_NCMD);
--
2.34.1
