From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
[ Upstream commit d60507200485bc778bf6a5556271d784ab09d913 ]
Replace (unused) enable-gpio binding with schema-defined wake-gpios. The
GPIO line is still unused, but at least we'd follow the defined schema.
While we are at it, change perst-gpio property to follow the preferred
naming schema (perst-gpios).
Fixes: 13e948a36db7 ("arm64: dts: qcom: sm8250: Commonize PCIe pins")
Cc: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20211214231448.2044987-1-dmitry.baryshkov@xxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index e2a5dfa7b1a0..a92230bec1dd 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1740,8 +1740,8 @@
phys = <&pcie0_lane>;
phy-names = "pciephy";
- perst-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>;
- enable-gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie0_default_state>;
@@ -1844,8 +1844,8 @@
phys = <&pcie1_lane>;
phy-names = "pciephy";
- perst-gpio = <&tlmm 82 GPIO_ACTIVE_LOW>;
- enable-gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie1_default_state>;
@@ -1950,8 +1950,8 @@
phys = <&pcie2_lane>;
phy-names = "pciephy";
- perst-gpio = <&tlmm 85 GPIO_ACTIVE_LOW>;
- enable-gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie2_default_state>;
--
2.34.1
