> -----Original Message----- > From: driverdev-devel-bounces@xxxxxxxxxxxxxxxxxxxxxx [mailto:driverdev- > devel-bounces@xxxxxxxxxxxxxxxxxxxxxx] On Behalf Of KY Srinivasan > Sent: Wednesday, July 9, 2014 1:07 PM > To: Christoph Hellwig > Cc: linux-scsi@xxxxxxxxxxxxxxx; jasowang@xxxxxxxxxx; linux- > kernel@xxxxxxxxxxxxxxx; jbottomley@xxxxxxxxxxxxx; ohering@xxxxxxxx; > stable@xxxxxxxxxxxxxxx; apw@xxxxxxxxxxxxx; devel@xxxxxxxxxxxxxxxxxxxxxx > Subject: RE: [PATCH 1/8] Drivers: scsi: storvsc: Change the limits to reflect the > values on the host > > > > > -----Original Message----- > > From: Christoph Hellwig [mailto:hch@xxxxxxxxxxxxx] > > Sent: Wednesday, July 9, 2014 1:40 AM > > To: KY Srinivasan > > Cc: linux-kernel@xxxxxxxxxxxxxxx; devel@xxxxxxxxxxxxxxxxxxxxxx; > > ohering@xxxxxxxx; jbottomley@xxxxxxxxxxxxx; jasowang@xxxxxxxxxx; > > apw@xxxxxxxxxxxxx; linux-scsi@xxxxxxxxxxxxxxx; stable@xxxxxxxxxxxxxxx > > Subject: Re: [PATCH 1/8] Drivers: scsi: storvsc: Change the limits to > > reflect the values on the host > > > > On Tue, Jul 08, 2014 at 05:46:45PM -0700, K. Y. Srinivasan wrote: > > > + * In Hyper-V, each port/path/target maps to 1 scsi host adapter. > > > > Does it still? The STORVSC_FC_MAX_TARGETS define suggests otherwise. > > I will fix the comments and get rid of unnecessary comments. > > > > > > - .cmd_per_lun = 1, > > > + .cmd_per_lun = 255, > > > > This looks like an unrelated change. > > I will have a separate patch for this. > > > > > + /* max # of devices per target */ > > > + host->max_lun = STORVSC_FC_MAX_LUNS_PER_TARGET; > > > + /* max # of targets per channel */ > > > + host->max_id = STORVSC_FC_MAX_TARGETS; > > > + /* max # of channels */ > > > + host->max_channel = STORVSC_FC_MAX_CHANNELS - 1; > > > > I don't think these comments add any value.. > > I will get rid of the comments. > > > > > Also any reason you use off by one defines for max_channel, but not > > the others? > > No particular reason; I will clean this up. On further examination max_channel is the maximum number of channels including channel 0. Thus the value set for max_channel is correct. max_id appears to indicate the limit. In scsi_scan_channel the loop control is (id < max_id) and hence the value I have here is correct. max_lun is also used like max_id to indicate the limit. In scsi_sequential_lun_scan() the loop control is (lun < max_dev_lun) and hence I think the value I have here is fine. Regards, K. Y -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html