From: Pavel Skripkin <paskripkin@xxxxxxxxx>
commit 5600f6986628dde8881734090588474f54a540a8 upstream.
Syzbot reported warning in usb_submit_urb() which is caused by wrong
endpoint type. There was a check for the number of endpoints, but not
for the type of endpoint.
Fix it by replacing old desc.bNumEndpoints check with
usb_find_common_endpoints() helper for finding endpoints
Fail log:
usb 5-1: BOGUS urb xfer, pipe 1 != type 3
WARNING: CPU: 2 PID: 48 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
Modules linked in:
CPU: 2 PID: 48 Comm: kworker/2:2 Not tainted 5.17.0-rc6-syzkaller-00226-g07ebd38a0da2 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Workqueue: usb_hub_wq hub_event
...
Call Trace:
<TASK>
aiptek_open+0xd5/0x130 drivers/input/tablet/aiptek.c:830
input_open_device+0x1bb/0x320 drivers/input/input.c:629
kbd_connect+0xfe/0x160 drivers/tty/vt/keyboard.c:1593
Fixes: 8e20cf2bce12 ("Input: aiptek - fix crash on detecting device without endpoints")
Reported-and-tested-by: syzbot+75cccf2b7da87fb6f84b@xxxxxxxxxxxxxxxxxxxxxxxxx
Signed-off-by: Pavel Skripkin <paskripkin@xxxxxxxxx>
Link: https://lore.kernel.org/r/20220308194328.26220-1-paskripkin@xxxxxxxxx
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/input/tablet/aiptek.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -1814,15 +1814,13 @@ aiptek_probe(struct usb_interface *intf,
input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0);
- /* Verify that a device really has an endpoint */
- if (intf->cur_altsetting->desc.bNumEndpoints < 1) {
+ err = usb_find_common_endpoints(intf->cur_altsetting,
+ NULL, NULL, &endpoint, NULL);
+ if (err) {
dev_err(&intf->dev,
- "interface has %d endpoints, but must have minimum 1\n",
- intf->cur_altsetting->desc.bNumEndpoints);
- err = -EINVAL;
+ "interface has no int in endpoints, but must have minimum 1\n");
goto fail3;
}
- endpoint = &intf->cur_altsetting->endpoint[0].desc;
/* Go set up our URB, which is called when the tablet receives
* input.
