[PATCH 5.4 01/17] crypto: qcom-rng - ensure buffer for generate is completely filled

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Brian Masney <bmasney@xxxxxxxxxx>

commit a680b1832ced3b5fa7c93484248fd221ea0d614b upstream.

The generate function in struct rng_alg expects that the destination
buffer is completely filled if the function returns 0. qcom_rng_read()
can run into a situation where the buffer is partially filled with
randomness and the remaining part of the buffer is zeroed since
qcom_rng_generate() doesn't check the return value. This issue can
be reproduced by running the following from libkcapi:

    kcapi-rng -b 9000000 > OUTFILE

The generated OUTFILE will have three huge sections that contain all
zeros, and this is caused by the code where the test
'val & PRNG_STATUS_DATA_AVAIL' fails.

Let's fix this issue by ensuring that qcom_rng_read() always returns
with a full buffer if the function returns success. Let's also have
qcom_rng_generate() return the correct value.

Here's some statistics from the ent project
(https://www.fourmilab.ch/random/) that shows information about the
quality of the generated numbers:

    $ ent -c qcom-random-before
    Value Char Occurrences Fraction
      0           606748   0.067416
      1            33104   0.003678
      2            33001   0.003667
    ...
    253   �        32883   0.003654
    254   �        33035   0.003671
    255   �        33239   0.003693

    Total:       9000000   1.000000

    Entropy = 7.811590 bits per byte.

    Optimum compression would reduce the size
    of this 9000000 byte file by 2 percent.

    Chi square distribution for 9000000 samples is 9329962.81, and
    randomly would exceed this value less than 0.01 percent of the
    times.

    Arithmetic mean value of data bytes is 119.3731 (127.5 = random).
    Monte Carlo value for Pi is 3.197293333 (error 1.77 percent).
    Serial correlation coefficient is 0.159130 (totally uncorrelated =
    0.0).

Without this patch, the results of the chi-square test is 0.01%, and
the numbers are certainly not random according to ent's project page.
The results improve with this patch:

    $ ent -c qcom-random-after
    Value Char Occurrences Fraction
      0            35432   0.003937
      1            35127   0.003903
      2            35424   0.003936
    ...
    253   �        35201   0.003911
    254   �        34835   0.003871
    255   �        35368   0.003930

    Total:       9000000   1.000000

    Entropy = 7.999979 bits per byte.

    Optimum compression would reduce the size
    of this 9000000 byte file by 0 percent.

    Chi square distribution for 9000000 samples is 258.77, and randomly
    would exceed this value 42.24 percent of the times.

    Arithmetic mean value of data bytes is 127.5006 (127.5 = random).
    Monte Carlo value for Pi is 3.141277333 (error 0.01 percent).
    Serial correlation coefficient is 0.000468 (totally uncorrelated =
    0.0).

This change was tested on a Nexus 5 phone (msm8974 SoC).

Signed-off-by: Brian Masney <bmasney@xxxxxxxxxx>
Fixes: ceec5f5b5988 ("crypto: qcom-rng - Add Qcom prng driver")
Cc: stable@xxxxxxxxxxxxxxx # 4.19+
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Reviewed-by: Andrew Halaney <ahalaney@xxxxxxxxxx>
Signed-off-by: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/crypto/qcom-rng.c |   17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

--- a/drivers/crypto/qcom-rng.c
+++ b/drivers/crypto/qcom-rng.c
@@ -7,6 +7,7 @@
 #include <linux/acpi.h>
 #include <linux/clk.h>
 #include <linux/crypto.h>
+#include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
@@ -42,16 +43,19 @@ static int qcom_rng_read(struct qcom_rng
 {
 	unsigned int currsize = 0;
 	u32 val;
+	int ret;
 
 	/* read random data from hardware */
 	do {
-		val = readl_relaxed(rng->base + PRNG_STATUS);
-		if (!(val & PRNG_STATUS_DATA_AVAIL))
-			break;
+		ret = readl_poll_timeout(rng->base + PRNG_STATUS, val,
+					 val & PRNG_STATUS_DATA_AVAIL,
+					 200, 10000);
+		if (ret)
+			return ret;
 
 		val = readl_relaxed(rng->base + PRNG_DATA_OUT);
 		if (!val)
-			break;
+			return -EINVAL;
 
 		if ((max - currsize) >= WORD_SZ) {
 			memcpy(data, &val, WORD_SZ);
@@ -60,11 +64,10 @@ static int qcom_rng_read(struct qcom_rng
 		} else {
 			/* copy only remaining bytes */
 			memcpy(data, &val, max - currsize);
-			break;
 		}
 	} while (currsize < max);
 
-	return currsize;
+	return 0;
 }
 
 static int qcom_rng_generate(struct crypto_rng *tfm,
@@ -86,7 +89,7 @@ static int qcom_rng_generate(struct cryp
 	mutex_unlock(&rng->lock);
 	clk_disable_unprepare(rng->clk);
 
-	return 0;
+	return ret;
 }
 
 static int qcom_rng_seed(struct crypto_rng *tfm, const u8 *seed,





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux