Re: [PATCH] mmc: sdhci-xenon: fix 1.8v regulator stabilization

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Monday 11 January 2021 19:06:24 Ulf Hansson wrote:
> On Fri, 11 Dec 2020 at 15:17, Marcin Wojtas <mw@xxxxxxxxxxxx> wrote:
> >
> > From: Alex Leibovich <alexl@xxxxxxxxxxx>
> >
> > Automatic Clock Gating is a feature used for the power
> > consumption optimisation. It turned out that
> > during early init phase it may prevent the stable voltage
> > switch to 1.8V - due to that on some platfroms an endless
> > printout in dmesg can be observed:
> > "mmc1: 1.8V regulator output did not became stable"
> > Fix the problem by disabling the ACG at very beginning
> > of the sdhci_init and let that be enabled later.
> >
> > Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality")
> > Signed-off-by: Alex Leibovich <alexl@xxxxxxxxxxx>
> > Signed-off-by: Marcin Wojtas <mw@xxxxxxxxxxxx>
> > Cc: stable@xxxxxxxxxxxxxxx
> 
> Applied for fixes (by fixing the typos), thanks!

Hello!

Is not this patch address same issue which was fixed by patch which was
merged earlier?

bb32e1987bc5 ("mmc: sdhci-xenon: fix annoying 1.8V regulator warning")
https://lore.kernel.org/linux-mmc/CAPDyKFqAsvgAjfL-c9ukFNWeGJmufQosR2Eg9SKjXMVpNitdkA@xxxxxxxxxxxxxx/

> Kind regards
> Uffe
> 
> 
> > ---
> >  drivers/mmc/host/sdhci-xenon.c | 7 ++++++-
> >  1 file changed, 6 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
> > index c67611fdaa8a..4b05f6fdefb4 100644
> > --- a/drivers/mmc/host/sdhci-xenon.c
> > +++ b/drivers/mmc/host/sdhci-xenon.c
> > @@ -168,7 +168,12 @@ static void xenon_reset_exit(struct sdhci_host *host,
> >         /* Disable tuning request and auto-retuning again */
> >         xenon_retune_setup(host);
> >
> > -       xenon_set_acg(host, true);
> > +       /*
> > +        * The ACG should be turned off at the early init time, in order
> > +        * to solve a possile issues with the 1.8V regulator stabilization.
> > +        * The feature is enabled in later stage.
> > +        */
> > +       xenon_set_acg(host, false);
> >
> >         xenon_set_sdclk_off_idle(host, sdhc_id, false);
> >
> > --
> > 2.29.0
> >



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux