[PATCH 5.15 35/58] arm64: entry: Add macro for reading symbol addresses from the trampoline

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: James Morse <james.morse@xxxxxxx>

commit b28a8eebe81c186fdb1a0078263b30576c8e1f42 upstream.

The trampoline code needs to use the address of symbols in the wider
kernel, e.g. vectors. PC-relative addressing wouldn't work as the
trampoline code doesn't run at the address the linker expected.

tramp_ventry uses a literal pool, unless CONFIG_RANDOMIZE_BASE is
set, in which case it uses the data page as a literal pool because
the data page can be unmapped when running in user-space, which is
required for CPUs vulnerable to meltdown.

Pull this logic out as a macro, instead of adding a third copy
of it.

Reviewed-by: Catalin Marinas <catalin.marinas@xxxxxxx>
Signed-off-by: James Morse <james.morse@xxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 arch/arm64/kernel/entry.S |   37 ++++++++++++++++---------------------
 1 file changed, 16 insertions(+), 21 deletions(-)

--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -646,6 +646,15 @@ alternative_else_nop_endif
 	sub	\dst, \dst, PAGE_SIZE
 	.endm
 
+	.macro tramp_data_read_var	dst, var
+#ifdef CONFIG_RANDOMIZE_BASE
+	tramp_data_page		\dst
+	add	\dst, \dst, #:lo12:__entry_tramp_data_\var
+	ldr	\dst, [\dst]
+#else
+	ldr	\dst, =\var
+#endif
+	.endm
 
 #define BHB_MITIGATION_NONE	0
 #define BHB_MITIGATION_LOOP	1
@@ -676,13 +685,8 @@ alternative_else_nop_endif
 	b	.
 2:
 	tramp_map_kernel	x30
-#ifdef CONFIG_RANDOMIZE_BASE
-	tramp_data_page		x30
 alternative_insn isb, nop, ARM64_WORKAROUND_QCOM_FALKOR_E1003
-	ldr	x30, [x30]
-#else
-	ldr	x30, =vectors
-#endif
+	tramp_data_read_var	x30, vectors
 alternative_if_not ARM64_WORKAROUND_CAVIUM_TX2_219_PRFM
 	prfm	plil1strm, [x30, #(1b - \vector_start)]
 alternative_else_nop_endif
@@ -765,7 +769,12 @@ SYM_CODE_END(tramp_exit_compat)
 	.pushsection ".rodata", "a"
 	.align PAGE_SHIFT
 SYM_DATA_START(__entry_tramp_data_start)
+__entry_tramp_data_vectors:
 	.quad	vectors
+#ifdef CONFIG_ARM_SDE_INTERFACE
+__entry_tramp_data___sdei_asm_handler:
+	.quad	__sdei_asm_handler
+#endif /* CONFIG_ARM_SDE_INTERFACE */
 SYM_DATA_END(__entry_tramp_data_start)
 	.popsection				// .rodata
 #endif /* CONFIG_RANDOMIZE_BASE */
@@ -932,14 +941,7 @@ SYM_CODE_START(__sdei_asm_entry_trampoli
 	 * Remember whether to unmap the kernel on exit.
 	 */
 1:	str	x4, [x1, #(SDEI_EVENT_INTREGS + S_SDEI_TTBR1)]
-
-#ifdef CONFIG_RANDOMIZE_BASE
-	tramp_data_page		x4
-	add	x4, x4, #:lo12:__sdei_asm_trampoline_next_handler
-	ldr	x4, [x4]
-#else
-	ldr	x4, =__sdei_asm_handler
-#endif
+	tramp_data_read_var     x4, __sdei_asm_handler
 	br	x4
 SYM_CODE_END(__sdei_asm_entry_trampoline)
 NOKPROBE(__sdei_asm_entry_trampoline)
@@ -962,13 +964,6 @@ SYM_CODE_END(__sdei_asm_exit_trampoline)
 NOKPROBE(__sdei_asm_exit_trampoline)
 	.ltorg
 .popsection		// .entry.tramp.text
-#ifdef CONFIG_RANDOMIZE_BASE
-.pushsection ".rodata", "a"
-SYM_DATA_START(__sdei_asm_trampoline_next_handler)
-	.quad	__sdei_asm_handler
-SYM_DATA_END(__sdei_asm_trampoline_next_handler)
-.popsection		// .rodata
-#endif /* CONFIG_RANDOMIZE_BASE */
 #endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */
 
 /*





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux