The problem I'm addressing was discovered by the LTP test covering
cve-2018-1000204.
A short description of what happens follows:
1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO
interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV
and a corresponding dxferp. The peculiar thing about this is that TUR
is not reading from the device.
2) In sg_start_req() the invocation of blk_rq_map_user() effectively
bounces the user-space buffer. As if the device was to transfer into
it. Since commit a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in
sg_build_indirect()") we make sure this first bounce buffer is
allocated with GFP_ZERO.
3) For the rest of the story we keep ignoring that we have a TUR, so the
device won't touch the buffer we prepare as if the we had a
DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device
and the buffer allocated by SG is mapped by the function
virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here
scatter-gather and not scsi generics). This mapping involves bouncing
via the swiotlb (we need swiotlb to do virtio in protected guest like
s390 Secure Execution, or AMD SEV).
4) When the SCSI TUR is done, we first copy back the content of the second
(that is swiotlb) bounce buffer (which most likely contains some
previous IO data), to the first bounce buffer, which contains all
zeros. Then we copy back the content of the first bounce buffer to
the user-space buffer.
5) The test case detects that the buffer, which it zero-initialized,
ain't all zeros and fails.
This is an swiotlb problem, because the swiotlb should be transparent in
a sense that it does not affect the outcome (if all other participants
are well behaved), and without swiotlb we leak all zeros. Even if
swiotlb_tbl_map_single() zero-initialised the allocated slot(s) to avoid
leaking stale data back to the caller later, when it comes to unmap or
sync_for_cpu it still fundamentally cannot tell how much of the contents
of the bounce slot have actually changed, therefore if the caller was
expecting the device to do a partial write, the rest of the mapped
buffer *will* be corrupted by bouncing the whole thing back again.
Copying the content of the original buffer into the swiotlb buffer is
the only way I can think of to make swiotlb transparent in such
scenarios. So let's do just that.
The extra bounce is expected to hurt the performance. For the cases
where the extra bounce is not necessary we could get rid of it, if we
were told by the client code, that it is not needed. Such optimisations
are out of scope for this patch, and are likely to be a subject of some
future work.
Signed-off-by: Halil Pasic <pasic@xxxxxxxxxxxxx>
Reported-by: Ali Haider <ali.haider@xxxxxxx>
Reviewed-by: Christoph Hellwig <hch@xxxxxx>
---
kernel/dma/swiotlb.c | 22 +++++++++++++++-------
1 file changed, 15 insertions(+), 7 deletions(-)
diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c
index f1e7ea160b43..6db1c475ec82 100644
--- a/kernel/dma/swiotlb.c
+++ b/kernel/dma/swiotlb.c
@@ -627,9 +627,14 @@ phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr,
for (i = 0; i < nr_slots(alloc_size + offset); i++)
mem->slots[index + i].orig_addr = slot_addr(orig_addr, i);
tlb_addr = slot_addr(mem->start, index) + offset;
- if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
- (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL))
- swiotlb_bounce(dev, tlb_addr, mapping_size, DMA_TO_DEVICE);
+ /*
+ * When dir == DMA_FROM_DEVICE we could omit the copy from the orig
+ * to the tlb buffer, if we knew for sure the device will
+ * overwirte the entire current content. But we don't. Thus
+ * unconditional bounce may prevent leaking swiotlb content (i.e.
+ * kernel memory) to user-space.
+ */
+ swiotlb_bounce(dev, tlb_addr, mapping_size, DMA_TO_DEVICE);
return tlb_addr;
}
@@ -696,10 +701,13 @@ void swiotlb_tbl_unmap_single(struct device *dev, phys_addr_t tlb_addr,
void swiotlb_sync_single_for_device(struct device *dev, phys_addr_t tlb_addr,
size_t size, enum dma_data_direction dir)
{
- if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)
- swiotlb_bounce(dev, tlb_addr, size, DMA_TO_DEVICE);
- else
- BUG_ON(dir != DMA_FROM_DEVICE);
+ /*
+ * Unconditional bounce is necessary to avoid corruption on
+ * sync_*_for_cpu or dma_ummap_* when the device didn't overwrite
+ * the whole lengt of the bounce buffer.
+ */
+ swiotlb_bounce(dev, tlb_addr, size, DMA_TO_DEVICE);
+ BUG_ON(!valid_dma_direction(dir));
}
void swiotlb_sync_single_for_cpu(struct device *dev, phys_addr_t tlb_addr,
--
2.32.0
