[PATCH 3.10 13/53] mtd: eLBC NAND: fix subpage write support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pekon Gupta <pekon@xxxxxx>

commit f034d87def51f026b735d1e2877e9387011b2ba3 upstream.

As subpage write is enabled by default for all drivers, nand_write_subpage_hwecc
causes a crash if the driver did not register ecc->hwctl or ecc->calculate.
This behavior was introduced in
   commit 837a6ba4f3b6d23026674e6af6b6849a4634fff9
   "mtd: nand: subpage write support for hardware based ECC schemes".

This fixes a crash by emulating subpage write support by padding sub-page data
with 0xff on either sides to make it full page compatible.

Reported-by: Helmut Schaa <helmut.schaa@xxxxxxxxxxxxxx>
Tested-by: Helmut Schaa <helmut.schaa@xxxxxxxxxxxxxx>
Signed-off-by: Pekon Gupta <pekon@xxxxxx>
Reviewed-by: Scott Wood <scottwood@xxxxxxxxxxxxx>
Signed-off-by: Brian Norris <computersforpeace@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/mtd/nand/fsl_elbc_nand.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -725,6 +725,19 @@ static int fsl_elbc_write_page(struct mt
 	return 0;
 }
 
+/* ECC will be calculated automatically, and errors will be detected in
+ * waitfunc.
+ */
+static int fsl_elbc_write_subpage(struct mtd_info *mtd, struct nand_chip *chip,
+				uint32_t offset, uint32_t data_len,
+				const uint8_t *buf, int oob_required)
+{
+	fsl_elbc_write_buf(mtd, buf, mtd->writesize);
+	fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return 0;
+}
+
 static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 {
 	struct fsl_lbc_ctrl *ctrl = priv->ctrl;
@@ -763,6 +776,7 @@ static int fsl_elbc_chip_init(struct fsl
 
 	chip->ecc.read_page = fsl_elbc_read_page;
 	chip->ecc.write_page = fsl_elbc_write_page;
+	chip->ecc.write_subpage = fsl_elbc_write_subpage;
 
 	/* If CS Base Register selects full hardware ECC then use it */
 	if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==


--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]