It's possible to change which CRTC is in use for a given
connector/encoder/bridge while we're in self-refresh without fully
disabling the connector/encoder/bridge along the way. This can confuse
the bridge encoder/bridge, because
(a) it needs to track the SR state (trying to perform "active"
operations while the panel is still in SR can be Bad(TM)); and
(b) it tracks the SR state via the CRTC state (and after the switch, the
previous SR state is lost).
Thus, we need to either somehow carry the self-refresh state over to the
new CRTC, or else force an encoder/bridge self-refresh transition during
such a switch.
I choose the latter, so we disable the encoder (and exit PSR) before
attaching it to the new CRTC (where we can continue to assume a clean
(non-self-refresh) state).
This fixes PSR issues seen on Rockchip RK3399 systems with
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c.
Change in v2:
- Drop "->enable" condition; this could possibly be "->active" to
reflect the intended hardware state, but it also is a little
over-specific. We want to make a transition through "disabled" any
time we're exiting PSR at the same time as a CRTC switch.
(Thanks Liu Ying)
Cc: Liu Ying <victor.liu@xxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>
Fixes: 1452c25b0e60 ("drm: Add helpers to kick off self refresh mode in drivers")
Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>
---
drivers/gpu/drm/drm_atomic_helper.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 9603193d2fa1..987e4b212e9f 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -1011,9 +1011,19 @@ crtc_needs_disable(struct drm_crtc_state *old_state,
return drm_atomic_crtc_effectively_active(old_state);
/*
- * We need to run through the crtc_funcs->disable() function if the CRTC
- * is currently on, if it's transitioning to self refresh mode, or if
- * it's in self refresh mode and needs to be fully disabled.
+ * We need to disable bridge(s) and CRTC if we're transitioning out of
+ * self-refresh and changing CRTCs at the same time, because the
+ * bridge tracks self-refresh status via CRTC state.
+ */
+ if (old_state->self_refresh_active &&
+ old_state->crtc != new_state->crtc)
+ return true;
+
+ /*
+ * We also need to run through the crtc_funcs->disable() function if
+ * the CRTC is currently on, if it's transitioning to self refresh
+ * mode, or if it's in self refresh mode and needs to be fully
+ * disabled.
*/
return old_state->active ||
(old_state->self_refresh_active && !new_state->active) ||
--
2.35.1.574.g5d30c73bfb-goog
