From: Maor Dickman <maord@xxxxxxxxxx>
commit fdc18e4e4bded2a08638cdcd22dc087a64b9ddad upstream.
Currently offload of rule on bareudp device require tunnel key
in order to match on mpls fields and without it the mpls fields
are ignored, this is incorrect due to the fact udp tunnel doesn't
have key to match on.
Fix by returning error in case flow is matching on tunnel key.
Fixes: 72046a91d134 ("net/mlx5e: Allow to match on mpls parameters")
Signed-off-by: Maor Dickman <maord@xxxxxxxxxx>
Reviewed-by: Roi Dayan <roid@xxxxxxxxxx>
Signed-off-by: Saeed Mahameed <saeedm@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_mplsoudp.c | 28 ++++-------
1 file changed, 11 insertions(+), 17 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_mplsoudp.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_mplsoudp.c
@@ -60,37 +60,31 @@ static int parse_tunnel(struct mlx5e_pri
void *headers_v)
{
struct flow_rule *rule = flow_cls_offload_flow_rule(f);
- struct flow_match_enc_keyid enc_keyid;
struct flow_match_mpls match;
void *misc2_c;
void *misc2_v;
- misc2_c = MLX5_ADDR_OF(fte_match_param, spec->match_criteria,
- misc_parameters_2);
- misc2_v = MLX5_ADDR_OF(fte_match_param, spec->match_value,
- misc_parameters_2);
-
- if (!flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_MPLS))
- return 0;
-
- if (!flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ENC_KEYID))
- return 0;
-
- flow_rule_match_enc_keyid(rule, &enc_keyid);
-
- if (!enc_keyid.mask->keyid)
- return 0;
-
if (!MLX5_CAP_ETH(priv->mdev, tunnel_stateless_mpls_over_udp) &&
!(MLX5_CAP_GEN(priv->mdev, flex_parser_protocols) & MLX5_FLEX_PROTO_CW_MPLS_UDP))
return -EOPNOTSUPP;
+ if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ENC_KEYID))
+ return -EOPNOTSUPP;
+
+ if (!flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_MPLS))
+ return 0;
+
flow_rule_match_mpls(rule, &match);
/* Only support matching the first LSE */
if (match.mask->used_lses != 1)
return -EOPNOTSUPP;
+ misc2_c = MLX5_ADDR_OF(fte_match_param, spec->match_criteria,
+ misc_parameters_2);
+ misc2_v = MLX5_ADDR_OF(fte_match_param, spec->match_value,
+ misc_parameters_2);
+
MLX5_SET(fte_match_set_misc2, misc2_c,
outer_first_mpls_over_udp.mpls_label,
match.mask->ls[0].mpls_label);
