On Tue, Jan 25, 2022 at 01:34:29PM +0100, Max Kellermann wrote:
> This fixes a problem that was supposed to be addressed by commit
> 6eefb79d6f5bc ("pwm: sun4i: Remove erroneous else branch") - backlight
> could not be switched off on some Allwinner A20. The commit was
> correct, but was not a reliable fix for the problem, which was timing
> related.
>
> The real problem for the backlight switching problem was that sleeping
> for a full period did not work, because delay_us is always zero.
>
> It is zero because the period (plus 1 microsecond) is rounded down to
> the next "jiffies", but the period is less than one jiffy.
>
> On my Cubieboard 2, the period is 5ms, and 1 jiffy (at the default
> HZ=100) is 10ms, so nsecs_to_jiffies(10ms+1us)=0.
>
> The roundtrip from nanoseconds to jiffies and back to microseconds is
> an unnecessary loss of precision; always rounding down (via
> nsecs_to_jiffies()) then causes the breakage.
>
> This patch eliminates this roundtrip, and directly converts from
> nanoseconds to microseconds (for usleep_range()), using
> DIV_ROUND_UP_ULL() to force rounding up. This way, the sleep time is
> never zero, and after the sleep, we are guaranteed to be in a
> different period, and the device is ready for another control command
> for sure.
>
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Max Kellermann <max.kellermann@xxxxxxxxx>
Sounds reasonable
Acked-by; Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |
Attachment:
signature.asc
Description: PGP signature
