Hi Anders,
Thanks for these, just a few comments below ...
Anders Roxell <anders.roxell@xxxxxxxxxx> writes:
> Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian
> 2.37.90.20220207) the following build error shows up:
>
> {standard input}: Assembler messages:
> {standard input}:1190: Error: unrecognized opcode: `stbcix'
> {standard input}:1433: Error: unrecognized opcode: `lwzcix'
> {standard input}:1453: Error: unrecognized opcode: `stbcix'
> {standard input}:1460: Error: unrecognized opcode: `stwcix'
> {standard input}:1596: Error: unrecognized opcode: `stbcix'
> ...
>
> Rework to add assembler directives [1] around the instruction. Going
> through the them one by one shows that the changes should be safe. Like
> __get_user_atomic_128_aligned() is only called in p9_hmi_special_emu(),
> which according to the name is specific to power9. And __raw_rm_read*()
> are only called in things that are powernv or book3s_hv specific.
>
> [1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo
>
> Cc: <stable@xxxxxxxxxxxxxxx>
> Co-developed-by: Arnd Bergmann <arnd@xxxxxxxx>
> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> Signed-off-by: Anders Roxell <anders.roxell@xxxxxxxxxx>
> ---
> arch/powerpc/include/asm/io.h | 46 +++++++++++++++++++++++-----
> arch/powerpc/include/asm/uaccess.h | 3 ++
> arch/powerpc/platforms/powernv/rng.c | 6 +++-
> 3 files changed, 46 insertions(+), 9 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
> index beba4979bff9..5ff6dec489f8 100644
> --- a/arch/powerpc/include/asm/io.h
> +++ b/arch/powerpc/include/asm/io.h
> @@ -359,25 +359,37 @@ static inline void __raw_writeq_be(unsigned long v, volatile void __iomem *addr)
> */
> static inline void __raw_rm_writeb(u8 val, volatile void __iomem *paddr)
> {
> - __asm__ __volatile__("stbcix %0,0,%1"
> + __asm__ __volatile__(".machine \"push\"\n"
> + ".machine \"power6\"\n"
> + "stbcix %0,0,%1\n"
> + ".machine \"pop\"\n"
> : : "r" (val), "r" (paddr) : "memory");
As Segher said it'd be cleaner without the embedded quotes.
> @@ -441,7 +465,10 @@ static inline unsigned int name(unsigned int port) \
> unsigned int x; \
> __asm__ __volatile__( \
> "sync\n" \
> + ".machine \"push\"\n" \
> + ".machine \"power6\"\n" \
> "0:" op " %0,0,%1\n" \
> + ".machine \"pop\"\n" \
> "1: twi 0,%0,0\n" \
> "2: isync\n" \
> "3: nop\n" \
> @@ -465,7 +492,10 @@ static inline void name(unsigned int val, unsigned int port) \
> { \
> __asm__ __volatile__( \
> "sync\n" \
> + ".machine \"push\"\n" \
> + ".machine \"power6\"\n" \
> "0:" op " %0,0,%1\n" \
> + ".machine \"pop\"\n" \
> "1: sync\n" \
> "2:\n" \
> EX_TABLE(0b, 2b) \
It's not visible from the diff, but the above two are __do_in_asm and
__do_out_asm and are inside an ifdef CONFIG_PPC32.
AFAICS they're only used for:
__do_in_asm(_rec_inb, "lbzx")
__do_in_asm(_rec_inw, "lhbrx")
__do_in_asm(_rec_inl, "lwbrx")
__do_out_asm(_rec_outb, "stbx")
__do_out_asm(_rec_outw, "sthbrx")
__do_out_asm(_rec_outl, "stwbrx")
Which are all old instructions, so I don't think we need the machine
power6 for those two macros?
> diff --git a/arch/powerpc/platforms/powernv/rng.c b/arch/powerpc/platforms/powernv/rng.c
> index b4386714494a..5bf30ef6d928 100644
> --- a/arch/powerpc/platforms/powernv/rng.c
> +++ b/arch/powerpc/platforms/powernv/rng.c
> @@ -43,7 +43,11 @@ static unsigned long rng_whiten(struct powernv_rng *rng, unsigned long val)
> unsigned long parity;
>
> /* Calculate the parity of the value */
> - asm ("popcntd %0,%1" : "=r" (parity) : "r" (val));
> + asm (".machine \"push\"\n"
> + ".machine \"power7\"\n"
> + "popcntd %0,%1\n"
> + ".machine \"pop\"\n"
> + : "=r" (parity) : "r" (val));
This was actually present in an older CPU, but it doesn't really matter,
this is fine.
cheers
