On one side we have indio_dev->num_channels includes all physical channels +
timestamp channel. On other side we have an array allocated only for
physical channels. So, fix memory corruption by ARRAY_SIZE() instead of
num_channels variable.
Note the first case is a cleanup rather than a fix as the software
timestamp channel bit in active_scanmask is never set by the IIO core.
Fixes: 9374e8f5a38d ("iio: adc: add ADC driver for the TI TSC2046 controller")
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220107081401.2816357-1-o.rempel@xxxxxxxxxxxxxx
Cc: <Stable@xxxxxxxxxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
---
drivers/iio/adc/ti-tsc2046.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/adc/ti-tsc2046.c b/drivers/iio/adc/ti-tsc2046.c
index d84ae6b008c1..e8fc4d01f30b 100644
--- a/drivers/iio/adc/ti-tsc2046.c
+++ b/drivers/iio/adc/ti-tsc2046.c
@@ -388,7 +388,7 @@ static int tsc2046_adc_update_scan_mode(struct iio_dev *indio_dev,
mutex_lock(&priv->slock);
size = 0;
- for_each_set_bit(ch_idx, active_scan_mask, indio_dev->num_channels) {
+ for_each_set_bit(ch_idx, active_scan_mask, ARRAY_SIZE(priv->l)) {
size += tsc2046_adc_group_set_layout(priv, group, ch_idx);
tsc2046_adc_group_set_cmd(priv, group, ch_idx);
group++;
@@ -548,7 +548,7 @@ static int tsc2046_adc_setup_spi_msg(struct tsc2046_adc_priv *priv)
* enabled.
*/
size = 0;
- for (ch_idx = 0; ch_idx < priv->dcfg->num_channels; ch_idx++)
+ for (ch_idx = 0; ch_idx < ARRAY_SIZE(priv->l); ch_idx++)
size += tsc2046_adc_group_set_layout(priv, ch_idx, ch_idx);
priv->tx = devm_kzalloc(&priv->spi->dev, size, GFP_KERNEL);
--
2.35.1
