From: James Smart <jsmart2021@xxxxxxxxx> commit efe1dc571a5b808baa26682eef16561be2e356fd upstream. Contention for the mailbox interface may occur during driver initialization (immediately after a function reset), between mailbox commands initiated via ioctl (bsg) and those driver requested by the driver. After setting SLI_ACTIVE flag for a port, there is a window in which the driver will allow an ioctl to be initiated while the adapter is initializing and issuing mailbox commands via polling. The polling logic then gets confused. Correct by having thread setting SLI_ACTIVE spot an active mailbox command and allow it complete before proceeding. Link: https://lore.kernel.org/r/20210921143008.64212-1-jsmart2021@xxxxxxxxx Co-developed-by: Nigel Kirkland <nkirkland2304@xxxxxxxxx> Signed-off-by: Nigel Kirkland <nkirkland2304@xxxxxxxxx> Signed-off-by: James Smart <jsmart2021@xxxxxxxxx> Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/scsi/lpfc/lpfc_sli.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -8147,6 +8147,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phb struct lpfc_vport *vport = phba->pport; struct lpfc_dmabuf *mp; struct lpfc_rqb *rqbp; + u32 flg; /* Perform a PCI function reset to start from clean */ rc = lpfc_pci_function_reset(phba); @@ -8160,7 +8161,17 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phb else { spin_lock_irq(&phba->hbalock); phba->sli.sli_flag |= LPFC_SLI_ACTIVE; + flg = phba->sli.sli_flag; spin_unlock_irq(&phba->hbalock); + /* Allow a little time after setting SLI_ACTIVE for any polled + * MBX commands to complete via BSG. + */ + for (i = 0; i < 50 && (flg & LPFC_SLI_MBOX_ACTIVE); i++) { + msleep(20); + spin_lock_irq(&phba->hbalock); + flg = phba->sli.sli_flag; + spin_unlock_irq(&phba->hbalock); + } } lpfc_sli4_dip(phba); @@ -9744,7 +9755,7 @@ lpfc_sli_issue_mbox_s4(struct lpfc_hba * "(%d):2541 Mailbox command x%x " "(x%x/x%x) failure: " "mqe_sta: x%x mcqe_sta: x%x/x%x " - "Data: x%x x%x\n,", + "Data: x%x x%x\n", mboxq->vport ? mboxq->vport->vpi : 0, mboxq->u.mb.mbxCommand, lpfc_sli_config_mbox_subsys_get(phba, @@ -9778,7 +9789,7 @@ lpfc_sli_issue_mbox_s4(struct lpfc_hba * "(%d):2597 Sync Mailbox command " "x%x (x%x/x%x) failure: " "mqe_sta: x%x mcqe_sta: x%x/x%x " - "Data: x%x x%x\n,", + "Data: x%x x%x\n", mboxq->vport ? mboxq->vport->vpi : 0, mboxq->u.mb.mbxCommand, lpfc_sli_config_mbox_subsys_get(phba,
