From: Martin Povišer <povik+lin@xxxxxxxxxxx>
commit 307f31452078792aab94a729fce33200c6e42dc4 upstream.
Per TAS2770 datasheet there must be a 1 ms delay from reset to first
command. So insert delays into the driver where appropriate.
Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220204095301.5554-1-povik+lin@xxxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
sound/soc/codecs/tas2770.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/sound/soc/codecs/tas2770.c
+++ b/sound/soc/codecs/tas2770.c
@@ -38,10 +38,12 @@ static void tas2770_reset(struct tas2770
gpiod_set_value_cansleep(tas2770->reset_gpio, 0);
msleep(20);
gpiod_set_value_cansleep(tas2770->reset_gpio, 1);
+ usleep_range(1000, 2000);
}
snd_soc_component_write(tas2770->component, TAS2770_SW_RST,
TAS2770_RST);
+ usleep_range(1000, 2000);
}
static int tas2770_set_bias_level(struct snd_soc_component *component,
@@ -110,6 +112,7 @@ static int tas2770_codec_resume(struct s
if (tas2770->sdz_gpio) {
gpiod_set_value_cansleep(tas2770->sdz_gpio, 1);
+ usleep_range(1000, 2000);
} else {
ret = snd_soc_component_update_bits(component, TAS2770_PWR_CTRL,
TAS2770_PWR_CTRL_MASK,
@@ -510,8 +513,10 @@ static int tas2770_codec_probe(struct sn
tas2770->component = component;
- if (tas2770->sdz_gpio)
+ if (tas2770->sdz_gpio) {
gpiod_set_value_cansleep(tas2770->sdz_gpio, 1);
+ usleep_range(1000, 2000);
+ }
tas2770_reset(tas2770);
