On Fri, Feb 18, 2022 at 09:50:54AM +0000, Christian Löhle wrote:
> commit 54309fde1a352ad2674ebba004a79f7d20b9f037 upstream.
>
> On reads with MMC_READ_MULTIPLE_BLOCK that fail,
> the recovery handler will use MMC_READ_SINGLE_BLOCK for
> each of the blocks, up to MMC_READ_SINGLE_RETRIES times each.
> The logic for this is fixed to never report unsuccessful reads
> as success to the block layer.
>
> On command error with retries remaining, blk_update_request was
> called with whatever value error was set last to.
> In case it was last set to BLK_STS_OK (default), the read will be
> reported as success, even though there was no data read from the device.
> This could happen on a CRC mismatch for the response,
> a card rejecting the command (e.g. again due to a CRC mismatch).
> In case it was last set to BLK_STS_IOERR, the error is reported correctly,
> but no retries will be attempted.
>
> Fixes: 81196976ed946c ("mmc: block: Add blk-mq support")
>
> Signed-off-by: Christian Loehle <cloehle@xxxxxxxxxxxxxx>
> ---
> drivers/mmc/core/block.c | 28 ++++++++++++++--------------
> 1 file changed, 14 insertions(+), 14 deletions(-)
What stable branch(s) is this backport for?
thanks,
greg k-h
