The interrupt mask is enabled before any potential failure points in the driver, which can leave a failure path where we exit with interrupts enabled but the device not live. This causes an infinite stream of interrupts on an Apple M1 Pro laptop on USB-C. Add a failure label that's used post enabling interrupts, where we mask them again before returning an error. Suggested-by: Sven Peter <sven@xxxxxxxxxxxxx> Cc: stable <stable@xxxxxxxxxxxxxxx> Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx> Signed-off-by: Jens Axboe <axboe@xxxxxxxxx> Link: https://lore.kernel.org/r/e6b80669-20f3-06e7-9ed5-8951a9c6db6f@xxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/typec/tipd/core.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c index 6d27a5b5e3ca..7ffcda94d323 100644 --- a/drivers/usb/typec/tipd/core.c +++ b/drivers/usb/typec/tipd/core.c @@ -761,12 +761,12 @@ static int tps6598x_probe(struct i2c_client *client) ret = tps6598x_read32(tps, TPS_REG_STATUS, &status); if (ret < 0) - return ret; + goto err_clear_mask; trace_tps6598x_status(status); ret = tps6598x_read32(tps, TPS_REG_SYSTEM_CONF, &conf); if (ret < 0) - return ret; + goto err_clear_mask; /* * This fwnode has a "compatible" property, but is never populated as a @@ -855,7 +855,8 @@ static int tps6598x_probe(struct i2c_client *client) usb_role_switch_put(tps->role_sw); err_fwnode_put: fwnode_handle_put(fwnode); - +err_clear_mask: + tps6598x_write64(tps, TPS_REG_INT_MASK1, 0); return ret; } -- 2.35.1
