[PATCH 5.16 141/203] net: dsa: lantiq_gswip: dont use devres for mdiobus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Vladimir Oltean <vladimir.oltean@xxxxxxx>

[ Upstream commit 0d120dfb5d67edc5bcd1804e167dba2b30809afd ]

As explained in commits:
74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres")
5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres")

mdiobus_free() will panic when called from devm_mdiobus_free() <-
devres_release_all() <- __device_release_driver(), and that mdiobus was
not previously unregistered.

The GSWIP switch is a platform device, so the initial set of constraints
that I thought would cause this (I2C or SPI buses which call ->remove on
->shutdown) do not apply. But there is one more which applies here.

If the DSA master itself is on a bus that calls ->remove from ->shutdown
(like dpaa2-eth, which is on the fsl-mc bus), there is a device link
between the switch and the DSA master, and device_links_unbind_consumers()
will unbind the GSWIP switch driver on shutdown.

So the same treatment must be applied to all DSA switch drivers, which
is: either use devres for both the mdiobus allocation and registration,
or don't use devres at all.

The gswip driver has the code structure in place for orderly mdiobus
removal, so just replace devm_mdiobus_alloc() with the non-devres
variant, and add manual free where necessary, to ensure that we don't
let devres free a still-registered bus.

Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: Jakub Kicinski <kuba@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/dsa/lantiq_gswip.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 7056d98d8177b..0909b05d02133 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -498,8 +498,9 @@ static int gswip_mdio_rd(struct mii_bus *bus, int addr, int reg)
 static int gswip_mdio(struct gswip_priv *priv, struct device_node *mdio_np)
 {
 	struct dsa_switch *ds = priv->ds;
+	int err;
 
-	ds->slave_mii_bus = devm_mdiobus_alloc(priv->dev);
+	ds->slave_mii_bus = mdiobus_alloc();
 	if (!ds->slave_mii_bus)
 		return -ENOMEM;
 
@@ -512,7 +513,11 @@ static int gswip_mdio(struct gswip_priv *priv, struct device_node *mdio_np)
 	ds->slave_mii_bus->parent = priv->dev;
 	ds->slave_mii_bus->phy_mask = ~ds->phys_mii_mask;
 
-	return of_mdiobus_register(ds->slave_mii_bus, mdio_np);
+	err = of_mdiobus_register(ds->slave_mii_bus, mdio_np);
+	if (err)
+		mdiobus_free(ds->slave_mii_bus);
+
+	return err;
 }
 
 static int gswip_pce_table_entry_read(struct gswip_priv *priv,
@@ -2186,8 +2191,10 @@ static int gswip_probe(struct platform_device *pdev)
 	gswip_mdio_mask(priv, GSWIP_MDIO_GLOB_ENABLE, 0, GSWIP_MDIO_GLOB);
 	dsa_unregister_switch(priv->ds);
 mdio_bus:
-	if (mdio_np)
+	if (mdio_np) {
 		mdiobus_unregister(priv->ds->slave_mii_bus);
+		mdiobus_free(priv->ds->slave_mii_bus);
+	}
 put_mdio_node:
 	of_node_put(mdio_np);
 	for (i = 0; i < priv->num_gphy_fw; i++)
@@ -2210,6 +2217,7 @@ static int gswip_remove(struct platform_device *pdev)
 
 	if (priv->ds->slave_mii_bus) {
 		mdiobus_unregister(priv->ds->slave_mii_bus);
+		mdiobus_free(priv->ds->slave_mii_bus);
 		of_node_put(priv->ds->slave_mii_bus->dev.of_node);
 	}
 
-- 
2.34.1






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux