[PATCH 5.16 007/203] mmc: sdhci-of-esdhc: Check for error num after setting mask

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Jiasheng Jiang <jiasheng@xxxxxxxxxxx>

commit 40c67c291a93f8846c4a972c9ef1b7ba4544c8d0 upstream.

Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.
And since the sdhci_setup_host() has already checked the return value of
the enable_dma, we need not check it in sdhci_resume_host() again.

Fixes: 5552d7ad596c ("mmc: sdhci-of-esdhc: set proper dma mask for ls104x chips")
Signed-off-by: Jiasheng Jiang <jiasheng@xxxxxxxxxxx>
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Link: https://lore.kernel.org/r/20220112083156.1124782-1-jiasheng@xxxxxxxxxxx
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/mmc/host/sdhci-of-esdhc.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -524,12 +524,16 @@ static void esdhc_of_adma_workaround(str
 
 static int esdhc_of_enable_dma(struct sdhci_host *host)
 {
+	int ret;
 	u32 value;
 	struct device *dev = mmc_dev(host->mmc);
 
 	if (of_device_is_compatible(dev->of_node, "fsl,ls1043a-esdhc") ||
-	    of_device_is_compatible(dev->of_node, "fsl,ls1046a-esdhc"))
-		dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40));
+	    of_device_is_compatible(dev->of_node, "fsl,ls1046a-esdhc")) {
+		ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40));
+		if (ret)
+			return ret;
+	}
 
 	value = sdhci_readl(host, ESDHC_DMA_SYSCTL);
 





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux