From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
[ Upstream commit 283d45145fbf460dbaf0229cacd7ed60ec52f364 ]
The port numbers for the imx8mq mipi csi controller are wrong and
the mipi driver can't find any media devices as port@1 is connected
to the CSI bridge, not port@0. And port@0 is connected to the
source - the sensor. Fix this.
Fixes: bcadd5f66c2a ("arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions")
Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx>
Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 2bc57d8f29c7f..1a7039bc0b37c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1123,8 +1123,8 @@ ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
- reg = <0>;
+ port@1 {
+ reg = <1>;
csi1_mipi_ep: endpoint {
remote-endpoint = <&csi1_ep>;
@@ -1175,8 +1175,8 @@ ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
- reg = <0>;
+ port@1 {
+ reg = <1>;
csi2_mipi_ep: endpoint {
remote-endpoint = <&csi2_ep>;
--
2.34.1
