With CPU re-ordering on write instructions, there might
be a chance that the HWO is set before the TRB is updated
with the new mapped buffer address.
And in the case where core is processing a list of TRBs
it is possible that it fetched the TRBs when the HWO is set
but before the buffer address is updated.
Prevent this by adding a memory barrier before the HWO
is updated to ensure that the core always process the
updated TRBs.
Fixes: f6bafc6a1c9d ("usb: dwc3: convert TRBs into bitshifts")
Cc: stable <stable@xxxxxxxxxxxxxxx>
Reviewed-by: Pavankumar Kondeti <quic_pkondeti@xxxxxxxxxxx>
Signed-off-by: Udipto Goswami <quic_ugoswami@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/1644207958-18287-1-git-send-email-quic_ugoswami@xxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/dwc3/gadget.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 520031ba38aa..183b90923f51 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1291,6 +1291,19 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
if (usb_endpoint_xfer_bulk(dep->endpoint.desc) && dep->stream_capable)
trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(stream_id);
+ /*
+ * As per data book 4.2.3.2TRB Control Bit Rules section
+ *
+ * The controller autonomously checks the HWO field of a TRB to determine if the
+ * entire TRB is valid. Therefore, software must ensure that the rest of the TRB
+ * is valid before setting the HWO field to '1'. In most systems, this means that
+ * software must update the fourth DWORD of a TRB last.
+ *
+ * However there is a possibility of CPU re-ordering here which can cause
+ * controller to observe the HWO bit set prematurely.
+ * Add a write memory barrier to prevent CPU re-ordering.
+ */
+ wmb();
trb->ctrl |= DWC3_TRB_CTRL_HWO;
dwc3_ep_inc_enq(dep);
--
2.35.1
