[PATCH 5.16 065/200] serial: pl011: Fix incorrect rs485 RTS polarity on set_mctrl

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Jochen Mades <jochen@xxxxxxxxx>

commit 62f676ff7898f6c1bd26ce014564773a3dc00601 upstream.

Commit 8d479237727c ("serial: amba-pl011: add RS485 support") sought to
keep RTS deasserted on set_mctrl if rs485 is enabled.  However it did so
only if deasserted RTS polarity is high.  Fix it in case it's low.

Fixes: 8d479237727c ("serial: amba-pl011: add RS485 support")
Cc: stable@xxxxxxxxxxxxxxx # v5.15+
Cc: Lino Sanfilippo <LinoSanfilippo@xxxxxx>
Signed-off-by: Jochen Mades <jochen@xxxxxxxxx>
[lukas: copyedit commit message, add stable designation]
Signed-off-by: Lukas Wunner <lukas@xxxxxxxxx>
Link: https://lore.kernel.org/r/85fa3323ba8c307943969b7343e23f34c3e652ba.1642909284.git.lukas@xxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/tty/serial/amba-pl011.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1615,8 +1615,12 @@ static void pl011_set_mctrl(struct uart_
 	    container_of(port, struct uart_amba_port, port);
 	unsigned int cr;
 
-	if (port->rs485.flags & SER_RS485_ENABLED)
-		mctrl &= ~TIOCM_RTS;
+	if (port->rs485.flags & SER_RS485_ENABLED) {
+		if (port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+			mctrl &= ~TIOCM_RTS;
+		else
+			mctrl |= TIOCM_RTS;
+	}
 
 	cr = pl011_read(uap, REG_CR);
 





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux