From: Geetha sowjanya <gakula@xxxxxxxxxxx>
[ Upstream commit df66b6ebc5dcf7253e35a640b9ec4add54195c25 ]
Internal looback is not supported to low rate LPCS interface like
SGMII/QSGMII. Hence don't allow to enable for such interfaces.
Fixes: 3ad3f8f93c81 ("octeontx2-af: cn10k: MAC internal loopback support")
Signed-off-by: Geetha sowjanya <gakula@xxxxxxxxxxx>
Signed-off-by: Subbaraya Sundeep <sbhatta@xxxxxxxxxxx>
Signed-off-by: Sunil Goutham <sgoutham@xxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
.../net/ethernet/marvell/octeontx2/af/rpm.c | 27 +++++++++----------
1 file changed, 12 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rpm.c b/drivers/net/ethernet/marvell/octeontx2/af/rpm.c
index 07b0eafccad87..b3803577324e6 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rpm.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rpm.c
@@ -251,22 +251,19 @@ int rpm_lmac_internal_loopback(void *rpmd, int lmac_id, bool enable)
if (!rpm || lmac_id >= rpm->lmac_count)
return -ENODEV;
lmac_type = rpm->mac_ops->get_lmac_type(rpm, lmac_id);
- if (lmac_type == LMAC_MODE_100G_R) {
- cfg = rpm_read(rpm, lmac_id, RPMX_MTI_PCS100X_CONTROL1);
-
- if (enable)
- cfg |= RPMX_MTI_PCS_LBK;
- else
- cfg &= ~RPMX_MTI_PCS_LBK;
- rpm_write(rpm, lmac_id, RPMX_MTI_PCS100X_CONTROL1, cfg);
- } else {
- cfg = rpm_read(rpm, lmac_id, RPMX_MTI_LPCSX_CONTROL1);
- if (enable)
- cfg |= RPMX_MTI_PCS_LBK;
- else
- cfg &= ~RPMX_MTI_PCS_LBK;
- rpm_write(rpm, lmac_id, RPMX_MTI_LPCSX_CONTROL1, cfg);
+
+ if (lmac_type == LMAC_MODE_QSGMII || lmac_type == LMAC_MODE_SGMII) {
+ dev_err(&rpm->pdev->dev, "loopback not supported for LPC mode\n");
+ return 0;
}
+ cfg = rpm_read(rpm, lmac_id, RPMX_MTI_PCS100X_CONTROL1);
+
+ if (enable)
+ cfg |= RPMX_MTI_PCS_LBK;
+ else
+ cfg &= ~RPMX_MTI_PCS_LBK;
+ rpm_write(rpm, lmac_id, RPMX_MTI_PCS100X_CONTROL1, cfg);
+
return 0;
}
--
2.34.1
