[PATCH 5.15 092/171] hwmon: (lm90) Reduce maximum conversion rate for G781

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Guenter Roeck <linux@xxxxxxxxxxxx>

[ Upstream commit a66c5ed539277b9f2363bbace0dba88b85b36c26 ]

According to its datasheet, G781 supports a maximum conversion rate value
of 8 (62.5 ms). However, chips labeled G781 and G780 were found to only
support a maximum conversion rate value of 7 (125 ms). On the other side,
chips labeled G781-1 and G784 were found to support a conversion rate value
of 8. There is no known means to distinguish G780 from G781 or G784; all
chips report the same manufacturer ID and chip revision.
Setting the conversion rate register value to 8 on chips not supporting
it causes unexpected behavior since the real conversion rate is set to 0
(16 seconds) if a value of 8 is written into the conversion rate register.
Limit the conversion rate register value to 7 for all G78x chips to avoid
the problem.

Fixes: ae544f64cc7b ("hwmon: (lm90) Add support for GMT G781")
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/hwmon/lm90.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -373,7 +373,7 @@ static const struct lm90_params lm90_par
 		.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
 		  | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_CRIT,
 		.alert_alarms = 0x7c,
-		.max_convrate = 8,
+		.max_convrate = 7,
 	},
 	[lm86] = {
 		.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux