From: Mohammad Athari Bin Ismail <mohammad.athari.ismail@xxxxxxxxx>
commit 0735e639f129dff455aeb91da291f5c578cc33db upstream.
When resume from suspend, besides skipping PTP registration, it also
skipping PTP HW initialization. This could cause PTP clock not able to
operate properly when resume from suspend.
To fix this, only stmmac_ptp_register() is skipped when resume from
suspend.
Fixes: fe1319291150 ("stmmac: Don't init ptp again when resume from suspend/hibernation")
Cc: <stable@xxxxxxxxxxxxxxx> # 5.15.x
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -924,8 +924,6 @@ static int stmmac_init_ptp(struct stmmac
priv->hwts_tx_en = 0;
priv->hwts_rx_en = 0;
- stmmac_ptp_register(priv);
-
return 0;
}
@@ -3240,7 +3238,7 @@ static int stmmac_fpe_start_wq(struct st
/**
* stmmac_hw_setup - setup mac in a usable state.
* @dev : pointer to the device structure.
- * @init_ptp: initialize PTP if set
+ * @ptp_register: register PTP if set
* Description:
* this is the main function to setup the HW in a usable state because the
* dma engine is reset, the core registers are configured (e.g. AXI,
@@ -3250,7 +3248,7 @@ static int stmmac_fpe_start_wq(struct st
* 0 on success and an appropriate (-)ve integer as defined in errno.h
* file on failure.
*/
-static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
+static int stmmac_hw_setup(struct net_device *dev, bool ptp_register)
{
struct stmmac_priv *priv = netdev_priv(dev);
u32 rx_cnt = priv->plat->rx_queues_to_use;
@@ -3307,13 +3305,13 @@ static int stmmac_hw_setup(struct net_de
stmmac_mmc_setup(priv);
- if (init_ptp) {
- ret = stmmac_init_ptp(priv);
- if (ret == -EOPNOTSUPP)
- netdev_warn(priv->dev, "PTP not supported by HW\n");
- else if (ret)
- netdev_warn(priv->dev, "PTP init failed\n");
- }
+ ret = stmmac_init_ptp(priv);
+ if (ret == -EOPNOTSUPP)
+ netdev_warn(priv->dev, "PTP not supported by HW\n");
+ else if (ret)
+ netdev_warn(priv->dev, "PTP init failed\n");
+ else if (ptp_register)
+ stmmac_ptp_register(priv);
priv->eee_tw_timer = STMMAC_DEFAULT_TWT_LS;
