FAILED: patch "[PATCH] serial: stm32: prevent TDR register overwrite when sending" failed to apply to 5.16-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch below does not apply to the 5.16-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

>From d3d079bde07e1b7deaeb57506dc0b86010121d17 Mon Sep 17 00:00:00 2001
From: Valentin Caron <valentin.caron@xxxxxxxxxxx>
Date: Tue, 11 Jan 2022 17:44:40 +0100
Subject: [PATCH] serial: stm32: prevent TDR register overwrite when sending
 x_char

When sending x_char in stm32_usart_transmit_chars(), driver can overwrite
the value of TDR register by the value of x_char. If this happens, the
previous value that was present in TDR register will not be sent through
uart.

This code checks if the previous value in TDR register is sent before
writing the x_char value into register.

Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Cc: stable <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Valentin Caron <valentin.caron@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20220111164441.6178-2-valentin.caron@xxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 1f89ab0e49ac..c1b8828451c8 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -550,11 +550,23 @@ static void stm32_usart_transmit_chars(struct uart_port *port)
 	struct stm32_port *stm32_port = to_stm32_port(port);
 	const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
 	struct circ_buf *xmit = &port->state->xmit;
+	u32 isr;
+	int ret;
 
 	if (port->x_char) {
 		if (stm32_usart_tx_dma_started(stm32_port) &&
 		    stm32_usart_tx_dma_enabled(stm32_port))
 			stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
+
+		/* Check that TDR is empty before filling FIFO */
+		ret =
+		readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr,
+						  isr,
+						  (isr & USART_SR_TXE),
+						  10, 1000);
+		if (ret)
+			dev_warn(port->dev, "1 character may be erased\n");
+
 		writel_relaxed(port->x_char, port->membase + ofs->tdr);
 		port->x_char = 0;
 		port->icount.tx++;




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux