Re: [PATCH v5] xhci: re-initialize the HC during resume if HCE was set

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19.1.2022 8.40, Puma Hsu wrote:
> When HCE(Host Controller Error) is set, it means an internal
> error condition has been detected. Software needs to re-initialize
> the HC, so add this check in xhci resume.
> 
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Puma Hsu <pumahsu@xxxxxxxxxx>
> ---
> v2: Follow Sergey Shtylyov <s.shtylyov@xxxxxx>'s comment.
> v3: Add stable@xxxxxxxxxxxxxxx for stable release.
> v4: Refine the commit message.
> v5: Add a debug log. Follow Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>'s comment.
> 
>  drivers/usb/host/xhci.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index dc357cabb265..41f594f0f73f 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -1146,8 +1146,10 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
>  		temp = readl(&xhci->op_regs->status);
>  	}
>  
> -	/* If restore operation fails, re-initialize the HC during resume */
> -	if ((temp & STS_SRE) || hibernated) {
> +	/* If restore operation fails or HC error is detected, re-initialize the HC during resume */
> +	if ((temp & (STS_SRE | STS_HCE)) || hibernated) {
> +		xhci_warn(xhci, "re-initialize HC during resume, USBSTS:%s\n",
> +			  xhci_decode_usbsts(str, temp));
>  
>  		if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
>  				!(xhci_all_ports_seen_u0(xhci))) {
> 

Tried to compile, something is missing in this patch:

drivers/usb/host/xhci.c:1152:25: error: ‘str’ undeclared (first use in this function); did you mean ‘qstr’?

-Mathias



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux