Re: [PATCH v1 2/2] usb: typec: tcpm: Do not disconnect when receiving VSAFE0V

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/21/22 17:55, Badhri Jagan Sridharan wrote:
With some chargers, vbus might momentarily raise above VSAFE5V and fall
back to 0V causing VSAFE0V to be triggered. This will
will report a VBUS off event causing TCPM to transition to

s/will will/will/

SNK_UNATTACHED state where it should be waiting in either SNK_ATTACH_WAIT
or SNK_DEBOUNCED state. This patch makes TCPM avoid VSAFE0V events
while in SNK_ATTACH_WAIT or SNK_DEBOUNCED state.

Stub from the spec:
     "4.5.2.2.4.2 Exiting from AttachWait.SNK State
     A Sink shall transition to Unattached.SNK when the state of both
     the CC1 and CC2 pins is SNK.Open for at least tPDDebounce.
     A DRP shall transition to Unattached.SRC when the state of both
     the CC1 and CC2 pins is SNK.Open for at least tPDDebounce."

[23.194131] CC1: 0 -> 0, CC2: 0 -> 5 [state SNK_UNATTACHED, polarity 0, connected]
[23.201777] state change SNK_UNATTACHED -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
[23.209949] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS]
[23.300579] VBUS off
[23.300668] state change SNK_ATTACH_WAIT -> SNK_UNATTACHED [rev3 NONE_AMS]
[23.301014] VBUS VSAFE0V
[23.301111] Start toggling

Fixes: 28b43d3d746b8 ("usb: typec: tcpm: Introduce vsafe0v for vbus")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Badhri Jagan Sridharan <badhri@xxxxxxxxxx>
---
  drivers/usb/typec/tcpm/tcpm.c | 4 ++++
  1 file changed, 4 insertions(+)

diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index b8afe3d8c882..5fce795b69c7 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -5264,6 +5264,10 @@ static void _tcpm_pd_vbus_vsafe0v(struct tcpm_port *port)
  	case PR_SWAP_SNK_SRC_SOURCE_ON:
  		/* Do nothing, vsafe0v is expected during transition */
  		break;
+	case SNK_ATTACH_WAIT:
+	case SNK_DEBOUNCED:
+		/*Do nothing, still waiting for VSAFE5V for connect */

Space before Do

s/for connect/to connect/, maybe ?

Other than that,

Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>

+		break;
  	default:
  		if (port->pwr_role == TYPEC_SINK && port->auto_vbus_discharge_enabled)
  			tcpm_set_state(port, SNK_UNATTACHED, 0);




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux