From: Meng Li <Meng.Li@xxxxxxxxxxxxx> commit efd21e10fc3bf4c6da122470a5ae89ec4ed8d180 upstream. When enable the kernel debug config, there is below calltrace detected: BUG: using smp_processor_id() in preemptible [00000000] code: cryptomgr_test/339 caller is debug_smp_processor_id+0x20/0x30 CPU: 9 PID: 339 Comm: cryptomgr_test Not tainted 5.10.63-yocto-standard #1 Hardware name: NXP Layerscape LX2160ARDB (DT) Call trace: dump_backtrace+0x0/0x1a0 show_stack+0x24/0x30 dump_stack+0xf0/0x13c check_preemption_disabled+0x100/0x110 debug_smp_processor_id+0x20/0x30 dpaa2_caam_enqueue+0x10c/0x25c ...... cryptomgr_test+0x38/0x60 kthread+0x158/0x164 ret_from_fork+0x10/0x38 According to the comment in commit ac5d15b4519f("crypto: caam/qi2 - use affine DPIOs "), because preemption is no longer disabled while trying to enqueue an FQID, it might be possible to run the enqueue on a different CPU(due to migration, when in process context), however this wouldn't be a functionality issue. But there will be above calltrace when enable kernel debug config. So, replace this_cpu_ptr with raw_cpu_ptr to avoid above call trace. Fixes: ac5d15b4519f ("crypto: caam/qi2 - use affine DPIOs") Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Meng Li <Meng.Li@xxxxxxxxxxxxx> Reviewed-by: Horia Geantă <horia.geanta@xxxxxxx> Signed-off-by: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/crypto/caam/caamalg_qi2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/crypto/caam/caamalg_qi2.c +++ b/drivers/crypto/caam/caamalg_qi2.c @@ -5467,7 +5467,7 @@ int dpaa2_caam_enqueue(struct device *de dpaa2_fd_set_len(&fd, dpaa2_fl_get_len(&req->fd_flt[1])); dpaa2_fd_set_flc(&fd, req->flc_dma); - ppriv = this_cpu_ptr(priv->ppriv); + ppriv = raw_cpu_ptr(priv->ppriv); for (i = 0; i < (priv->dpseci_attr.num_tx_queues << 1); i++) { err = dpaa2_io_service_enqueue_fq(ppriv->dpio, ppriv->req_fqid, &fd);