From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx> commit aa1baa0e6c1aa4872e481dce4fc7fd6f3dd8496b upstream. There is no need to explicitly set the default gpmi clock rate during boot for the i.MX 6 since this is done during nand_detect anyway. Signed-off-by: Stefan Riedmueller <s.riedmueller@xxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx Acked-by: Han Xu <han.xu@xxxxxxx> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> Link: https://lore.kernel.org/linux-mtd/20211102202022.15551-1-ceggers@xxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 9 --------- 1 file changed, 9 deletions(-) --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c @@ -1052,15 +1052,6 @@ static int gpmi_get_clks(struct gpmi_nan r->clock[i] = clk; } - if (GPMI_IS_MX6(this)) - /* - * Set the default value for the gpmi clock. - * - * If you want to use the ONFI nand which is in the - * Synchronous Mode, you should change the clock as you need. - */ - clk_set_rate(r->clock[0], 22000000); - return 0; err_clock:
