From: Dmitry Osipenko <digetx@xxxxxxxxx> commit 7620ad0bdfac1efff4a1228cd36ae62a9d8206b0 upstream. The PWR_OFF bit needs to be set in order to power off properly, without hanging PMIC. This bit needs to be set early in order to allow thermal protection of NVIDIA Terga SoCs to power off hardware properly, otherwise a battery re-plug may be needed on some devices to recover after the hang. Cc: <stable@xxxxxxxxxxxxxxx> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx> Tested-by: Svyatoslav Ryhel <clamor95@xxxxxxxxx> # ASUS TF201 Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx> Link: https://lore.kernel.org/r/20211124190104.23554-1-digetx@xxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/mfd/tps65910.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -436,15 +436,6 @@ static void tps65910_power_off(void) tps65910 = dev_get_drvdata(&tps65910_i2c_client->dev); - /* - * The PWR_OFF bit needs to be set separately, before transitioning - * to the OFF state. It enables the "sequential" power-off mode on - * TPS65911, it's a NO-OP on TPS65910. - */ - if (regmap_set_bits(tps65910->regmap, TPS65910_DEVCTRL, - DEVCTRL_PWR_OFF_MASK) < 0) - return; - regmap_update_bits(tps65910->regmap, TPS65910_DEVCTRL, DEVCTRL_DEV_OFF_MASK | DEVCTRL_DEV_ON_MASK, DEVCTRL_DEV_OFF_MASK); @@ -504,6 +495,19 @@ static int tps65910_i2c_probe(struct i2c tps65910_sleepinit(tps65910, pmic_plat_data); if (pmic_plat_data->pm_off && !pm_power_off) { + /* + * The PWR_OFF bit needs to be set separately, before + * transitioning to the OFF state. It enables the "sequential" + * power-off mode on TPS65911, it's a NO-OP on TPS65910. + */ + ret = regmap_set_bits(tps65910->regmap, TPS65910_DEVCTRL, + DEVCTRL_PWR_OFF_MASK); + if (ret) { + dev_err(&i2c->dev, "failed to set power-off mode: %d\n", + ret); + return ret; + } + tps65910_i2c_client = i2c; pm_power_off = tps65910_power_off; }
