From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
commit cbe0b3af73bf72fad197756f026084404e2bcdc7 upstream.
If powering on the sensor failed, the entire power-off sequence was run
independently of how far the power-on sequence proceeded before the error.
This lead to disabling regulators and/or clock that was not enabled.
Fix this by disabling only clocks and regulators that were enabled
previously.
Fixes: 11c0d8fdccc5 ("media: i2c: Add support for the OV8865 image sensor")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/media/i2c/ov8865.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
--- a/drivers/media/i2c/ov8865.c
+++ b/drivers/media/i2c/ov8865.c
@@ -2330,27 +2330,27 @@ static int ov8865_sensor_power(struct ov
if (ret) {
dev_err(sensor->dev,
"failed to enable DOVDD regulator\n");
- goto disable;
+ return ret;
}
ret = regulator_enable(sensor->avdd);
if (ret) {
dev_err(sensor->dev,
"failed to enable AVDD regulator\n");
- goto disable;
+ goto disable_dovdd;
}
ret = regulator_enable(sensor->dvdd);
if (ret) {
dev_err(sensor->dev,
"failed to enable DVDD regulator\n");
- goto disable;
+ goto disable_avdd;
}
ret = clk_prepare_enable(sensor->extclk);
if (ret) {
dev_err(sensor->dev, "failed to enable EXTCLK clock\n");
- goto disable;
+ goto disable_dvdd;
}
gpiod_set_value_cansleep(sensor->reset, 0);
@@ -2359,14 +2359,16 @@ static int ov8865_sensor_power(struct ov
/* Time to enter streaming mode according to power timings. */
usleep_range(10000, 12000);
} else {
-disable:
gpiod_set_value_cansleep(sensor->powerdown, 1);
gpiod_set_value_cansleep(sensor->reset, 1);
clk_disable_unprepare(sensor->extclk);
+disable_dvdd:
regulator_disable(sensor->dvdd);
+disable_avdd:
regulator_disable(sensor->avdd);
+disable_dovdd:
regulator_disable(sensor->dovdd);
}
